( File Name: HS-SU-Kr.txt 27/8/2006
( Krypton Interrupter combined heatsink - Side SURFACE
( for surface milling the transistor fixing surfaces
( .
( Set start reference datum at x-3800, y-3600
( Install 76mm Shell Mill Cutter
( Spindle speed set to 1000rpm
( operation begins automatically when quil TDC switch is opened
( raise the quill at the end of the last stroke
( with appropriate care the part can be removed during the parked condition
( 80% Kero+ 20% RTD used as cutting lubricant
( .
( datum is x = 0 mm, y = -38.0 mm, includes 6.3 mm packing
clr		( clear all existing programs/commands
p		( begin programme
m 1		( set motor to FULL step mode
t 200		( set start speed to 200 steps/sec
max 200	        ( set MAXimum motor speed to steps per sec. i.e. 400 steps/sec
a 500		( set acceleration to 500 steps/sec/sec
de 500          ( set deceleration to 1500 steps/sec/sec
k 50            ( sets step constant to 50 ?
s 4 0
s 4 1
o 1 1           ( mist lubrication ON
w 5
x 24100         ( move "x" axis 165.00 mm
o 1 0           ( mist lubrication OFF
s 4 0           ( sense TDC/BDC closed - acknowledge reverse
t 900
max 900
a 1200
de 1200
x -24100
g               ( go to begining and repeat as often as job/parts require
q