| MILL DIAMETER | LENGTH OF CUT | OVARALL LENGTH | SHANK DIAMETER |
| 2mm | 6.5mm | 40mm | 4mm |
| 2.5mm | 6.5mm | 40mm | 4mm |
| 3mm | 9mm | 50mm | 6mm |
| 4mm | 12mm | 50mm | 6mm |
| 5mm | 15mm | 50mm | 5mm |
| 6mm | 16mm | 50mm | 6mm |
| 8mm | 20mm | 64mm | 8mm |
| 10mm | 22mm | 70mm | 10mm |
| 12mm | 25mm | 75mm | 12mm |
| 14mm | 32mm | 90mm | 14mm |
| 16mm | 32mm | 90mm | 16mm |
| 4 FLUTE CENTRE CUTTING | RAKE ANGLE 10 DEGREES |
HELIX ANGLE 40 DEGREES |
MICRO GRAIN CARBIDE | NiTiCo COATING |
Price excludes
GST
SPECIAL SET
PRICE
$249.00
NOW $199.00
$249.00
NOW $199.00
| MILL DIAMETER | LENGTH OF CUT | OVARALL LENGTH | SHANK DIAMETER |
| 4mm | 12mm | 50mm | 6mm |
| 5mm | 15mm | 50mm | 5mm |
| 6mm | 16mm | 50mm | 6mm |
| 8mm | 20mm | 64mm | 8mm |
| 10mm | 22mm | 70mm | 10mm |
| 12mm | 25mm | 75mm | 12mm |
| 14mm | 32mm | 90mm | 14mm |
| 16mm | 32mm | 90mm | 16mm |
| MILL DIAMETER | LENGTH OF CUT | OVARALL LENGTH | SHANK DIAMETER |
| 4mm | 12mm | 50mm | 6mm |
| 5mm | 15mm | 50mm | 5mm |
| 6mm | 16mm | 50mm | 6mm |
| 8mm | 20mm | 64mm | 8mm |
| 10mm | 22mm | 70mm | 10mm |
| 12mm | 25mm | 75mm | 12mm |
| 14mm | 32mm | 90mm | 14mm |
| 16mm | 32mm | 90mm | 16mm |
| 3 FLUTE CENTRE CUTTING | RAKE ANGLE 10 DEGREES |
HELIX ANGLE 40 DEGREES |
MICRO GRAIN CARBIDE | NiTiCo COATING |
| 3 FLUTE CENTRE CUTTING | RAKE ANGLE 21 DEGREES |
HELIX ANGLE 50 DEGREES |
MICRO GRAIN CARBIDE | UNCOATED |
| ALUMINIUM CUTTING ENDMILLS |
|
Completely New Milling
Generation Extra fine micro grain carbide V7 Mill is the future generation of performance carbide machining. YG-1 V7 Mills are specifically designed for high performance machining of Mild Steels, Tool Steels Stainless steel, Inconel and Titanium, and allows you to rough and finish with one tool. Tools for silent cutting when machining tough materials at high speeds and heavy cuts due to special wavy helix and unique flute geometry. Very smooth chip removal and Silent machining. When slotting with V7 Mill you are able to take a depth of cut equal to the diameter, something no other finishing end mill will allow you to do. The other benefits are supreme surface finish, improved oxidation resistance and toughness. V7 Mills are made from prime grade carbide and coated with AlTiN. |
Contains 6 8
10 and 12mm cutters
CARBIDE
ENDMILL
| MILL DIAMETER | LENGTH OF CUT | OVARALL LENGTH | SHANK DIAMETER |
| 2mm | 6.5mm | 40mm | 4mm |
| 2.5mm | 6.5mm | 40mm | 4mm |
| 3mm | 9mm | 40mm | 3mm |
| 4mm | 12mm | 50mm | 4mm |
| 5mm | 15mm | 50mm | 5mm |
| 6mm | 16mm | 50mm | 6mm |
| 8mm | 20mm | 64mm | 8mm |
| 10mm | 22mm | 70mm | 10mm |
| 12mm | 25mm | 75mm | 12mm |
| 14mm | 32mm | 90mm | 14mm |
| 16mm | 32mm | 90mm | 16mm |
| 2 FLUTE CENTRE CUTTING | RAKE ANGLE 10 DEGREES |
HELIX ANGLE 40 DEGREES |
MICRO GRAIN CARBIDE | NiTiCo COATING |
| 2 FLUTE ENDMILLS |
| 3 FLUTE ENDMILLS |
| 4 FLUTE ENDMILLS |