XPM-200

Fast USB or serial interface
Prints up to 100 mm/sec.
Drivers for Windows and Linux
Powerful transport motor feeds large paper rolls with diameters up to 300 mm or fanfold stacks
Optional dual-feed unit and/or loop presenter

Have questions or need an offer?

Tel.: +49 / 7424 - 89 -0
Contact form

Gerne helfen wir Ihnen weiter.

Hengstler GmbH
Uhlandstr. 49
78554 Aldingen
Tel. +49 / 7424 - 89 -282
Supportanfrage

General

Product Family

XPM-200

Technical information

Paper Width [mm]	210 ... 220 mm
Resolution [dpi]	203 dpi 300dpi
Interface	USB RS-233
Voltage [VDC]	24 VDC
Cutter	Standard Pizza-cutter type
Technology	Direct Thermal
Printhead Life	100 km of approved paper, 100 million dot pulses (each printhead)
Graphic Drivers	Windows XP, Windows 7, Linux (CUPS)
Bar Codes	UPC-A, UPC-E, EAN-13, EAN-8, Code 39, Interleaved 2 of 5, Code 128, Codabar, PDF 417
Dimensions WxHxD [mm]	287 x 103 x 102 mm
Storage Temperature [°C]	-30 ... +75 °C
Options	Dual-Feed, Chassis, extended Temperature Range
Paper Weight [g/m²]	80 ... 100 g/m²
Print Witdh [mm]	216 mm
Environmental	0ºC ... +50ºC, 25% - 80% RH, without condensation
Print Speed [mm/s]	up to 100 mm/s
Output Type	Standard Output Type
PPE Sensor	Paper Pre-End Sensor included loose for customer mounting Paper Pre-End Sensor included in chassis
Presenter	Loop Presenter with Retract optional
Paper Entry Sensor 1	Reflex Sensor Pos. 12
Paper Entry Sensor 2	not applicable
Controller	XPM / TPM Controller XPM - Controller
Connector Location	Standard
Feeder	Dual-Feed optional
Presenter/Bundler	Loop Presenter with Retract optional
Printer Chassis + Paper Roll Holder	various chassis options available
Extended warranty	Extended Warranty optional

Keyfeatures

Key Features

High resolution-300 dpi
Fast USB or Serial interface
Prints up to 100 mm/sec
Handles 300 mm diameter paper rolls
Optional loop presenter with retract
Optional dual-feed unit allows two different paper sources

The XPM-200 thermal printer from HENGSTLER is one of the most versatile machines on the market. It is designed for paper widths of 210-220 mm (ideal for A$ and US Letter formats) and printing speeds of up to 100 mm/sec. The fast USB interface makes it quick & easy to connect up the printer, while the Windows and Linux drivers simplify integration in your applications. The integrated cutter is standard while the optional loop presenter with a retract function allows confidential details to be protected if the printout is not removed. Optional dual-feed units enable two different types of paper to be infed or, alternatively, the printer can automatically switch over to the second roll of paper when the first runs out. Since the printing module and controller are individually installed, existing units can be ideally used in the installation.