Overview      Standard Features      Solutions      Models      Options      Memory      Storage      Power Specifications      Technical Specifications

Overview

HP ProLiant DL580 Generation 2 (G2)

|

1. Six 64-bit/100-MHz PCI-X I/O Slots (Four Hot Plug, two Non-Hot Plug)
2. Dual Memory Expansion Boards (8 DIMM slots each - one board standard on all models, 2nd board is optional)
3. Hot Plug Redundant Fans
4. Processor Air Baffle
5. 4U (7" Height) Rack Form Factor
6. Up to 4 Intel Processors MP

7. Integrated Smart Array 5i Plus Controller (Battery Backed Write Cache standard on all 2P models, optional on 1P model)

8. Tool-less "Snap In" rail solution
9. Additional Hot Plug Redundant Fans
10. Server Lifting Handle

11. Front Panel LED Display (internal and external health, Unit ID light) and Power Button
12. Wide Ultra3/U320 Duplex Drive Cage (can be Simplex configured)
13. Dual 800-Watt Hot Plug Redundant Power Supplies (low line or high line), standard on all 2P models (one ships standard on 1P model, requires optional RPS for redundancy)
14. Slimline Drives: 24X (slimline) CD-ROM IDE Drive
15. Slimline Drives: Ejectable 1.44 MB (slimline) Diskette Drive
16. QuickFind Diagnostic Display (viewable through Front Access Panel)

17. Removable Front Access Panel

18. Removable Rear Access Panel

What's New

Intel® Xeon Processors MP at 2.2 GHz/2MB, 2.7 GHz/2MB or 3.0 GHz/4MB

Integrated Dual Port NC7170 PCI-X Gigabit Server Adapter in a slot

At A Glance

Delivering maximum performance and unprecedented availability in a flexible, rack optimized form factor
Intel Xeon Processors MP
ServerWorks Grand Champion-HE chipset
4x1 interleaved memory, 200MHz DDR SDRAM Memory (PC1600 Registered SDRAM with Advanced ECC functionality)
2048 MB (2P Models) or 1024 MB (1P Model) standard memory, expandable to 32 GB
HP Advanced Memory Protection (Online Spare, Single Board Mirrored Memory, Hot Plug Mirrored Memory, Hot Add Memory)
Six, full length 64-bit/100 MHz PCI-X slots, 4 Hot Pluggable
Integrated Lights-Out Standard Management (iLO) on system board
Integrated NC7770 PCI-X Gigabit Server Adapter or Integrated HP NC7170 Dual-Port PCI-X 1000T Gigabit Server Adapter in a slot Depending on model)
Integrated Smart Array 5i Plus Controller (Dual Channel, Ultra3) with 64-MB total memory on 5i Plus Memory Module
Battery-Backed Write Cache Enabler module on all 2P models (optional on 1P model)
Internal Hot Plug Drive Storage of up to 1.20 TB (4 x 300 GB 1" Ultra320 hard drives) or one DAT hot plug tape drive and two hot plug hard drives
Redundant Cooling Zones for major subsystems (Memory, I/O, CPUs) assure 7x24 cooling
Toolless and virtually cable-less internal design
Innovative diagnostic lighting (QuickFind Diagnostic Display) for rapid response to service events
Rapid Deployment racking solution (rack rails and cable management)
Protected by HP Services and a worldwide network of resellers and service providers. Three-year Next Business Day, on-site limited global warranty. Certain restrictions and exclusions apply. Pre-Failure Notification on processors, memory, and SCSI hard drives.

Overview      Standard Features      Solutions      Models      Options      Memory      Storage      Power Specifications      Technical Specifications

Standard Features

Processor
One or more of the following depending
on Model

Intel Xeon Processor MP at 3.0 GHz\4MB

Intel Xeon Processor MP at 2.7 GHz\2MB
Intel Xeon Processor MP at 2.2 GHz\2MB
Intel Xeon Processor MP at 2.8 GHz\2MB
Intel Xeon Processor MP at 2.5 GHz\1MB
Intel Xeon Processor MP at 2.0 GHz\1MB

Cache Memory
One of the following depending
on Model

4MB Integrated Level 3 Cache
NOTE: 3.0 GHz Models only.

2MB Integrated Level 3 Cache
NOTE: 2.8 GHz, 2.2 GHz, 2.7 GHz Models only.

1MB Integrated Level 3 Cache
NOTE: 2.5 GHz, 2.0 GHz Models only.

Upgradability | Upgradable to quad processing

Chipset | ServerWorks Grand Champion-HE chipset

NOTE: For more information regarding ServerWorks, please see the following URL:
http://www.serverworks.com/products/overview.html..

Memory
One of the following depending
on Model

Type

200-MHz Double Data Rate (DDR) SDRAM (PC1600 Registered SDRAM Memory with Advanced ECC functionality)

Standard (2P Models) | 2048 MB
Standard (1P Models) | 1024 MB
Maximum | 32 GB

NOTE: Advanced ECC Memory Technology protects the data even in the event of an entire SDRAM component failure. Embedded in the chipset design, this feature allows the use of Industry-Standard Registered DIMMs.
NOTE: 32 GB achieved with use of 2nd, optional memory board and 2GB Registered DIMM sticks.

Network Controller
One of the following depending
on Model

Integrated NC7170 dual port PCI-X Gigabit Server Adapter in a slot (3.0 GHz, 2.7 GHz, 2.2 GHz models only)

Integrated NC7770 PCI-X Gigabit Server Adapter in a slot

Expansion Slots

Bus speed

Bus number

Hot Plug

PCI Voltage

Notes

1

64-bit / 100 MHz PCI-X

10

No

3.3 Volt

Support RILOE slot

2

64-bit / 100 MHz PCI-X

10

No

3.3 Volt

NC7770/ NC7170 (3.0 GHz, 2.7 GHz, 2.2 GHz models) installed standard

3

64-bit / 100 MHz PCI-X

6

Yes

3.3 Volt

None

4

64-bit / 100 MHz PCI-X

6

Yes

3.3 Volt

None

5

64-bit / 100 MHz PCI-X

2

Yes

3.3 Volt

None

6

64-bit / 100 MHz PCI-X

2

Yes

3.3 Volt

None

Manageability | Integrated Lights-Out (iLO) Standard Management (ASIC on the System Board)

Storage Controllers | Smart Array 5i Plus Controller (integrated on system board), Dual Channel, Ultra3 (supports RAID 0, 1, 1+0, and 5 across internal hard disk drives) with 64 MB of memory.

64-MB total memory for code, transfer buffers, and read/write cache on the 5i Plus Memory Module

Connector for Battery Backed Write Cache (BBWC) Enabler

NOTE: The Smart Array 5i Plus Controller is integrated on the system board and is designed to support the duplex/simplex drive cage. An external SCSI port is not available on the HP ProLiant DL580 G2. External SCSI solutions require the addition of a PCI or PCI-X option card. Slot based Smart Array controllers can support both internal hard drives as well as external SCSI solutions.

Storage Data Protection | The Battery-Backed Write Cache (BBWC) Enabler protects up to 64-MB write cache memory from hard boot, power, controller, or system board failures.

Standard on 2P Models, optional on 1P Models

Battery charge/life: Up to 72 hours/3 years

Transportable data protection

Increases overall controller performance

NOTE: Safely transport your write cache data to another HP ProLiant DL580 G2 in the data center by removing the BBWC Enabler and 5i Plus Memory Module simultaneously (connected by short cable).

Storage | Diskette Drive | 1.44 MB (slimline) – ejectable for security and serviceability
Optical Drive | 24x IDE CD-ROM Drive (slimline) – ejectable for security and serviceability
Hard Drives | None
Maximum Internal Storage | 1.20 TB (4 x 300 GB Ultra320 1" SCSI drives) (internal hot plug Ultra3 drive cage)

Hard Disk Drive Backplane

Internal Wide Ultra3/U320 backplane supports up to four 1" hard disk drives and is easily configurable to support simplex (4x1) or duplex mode (2x2) Standard shipping configuration is the duplex mode.
NOTE: U320 speeds achieved by installing a slot based U320 Smart Array controller and can control both the internal hard drives as well as external storage solutions.
NOTE: Optional SCSI cable assembly 288874-B21 is required for connecting Smart Array Controller in a PCI slot to internal hard drive backplane. Duplex configuration requires two such kits.

Interfaces | Serial | 1
| Pointing Device (Mouse) | 1
| Graphics | 1
| Keyboard | 1
| Rear USB Ports | 2
| iLO Remote Management | 1
| Network RJ-45 | 1 / 2

Graphics | Integrated 1280 x 1024, 16M color on PCI local bus, 8-MB of SDRAM video memory

Form Factor

Rack (4U = 7 inches), ships with sliding rails and cable management system
Space saving form factor (4U) provides space efficiencies while providing maximum deployment flexibility

ProLiant Essentials Foundation Pack Software

HP Systems Insight Manager | HP's new HP Systems Insight Manager (HP SIM) helps maximize system uptime and performance and reduce system maintenance costs by providing proactive notification of problems before those problems result in unplanned downtime or reduced productivity. HP SIM are both easy to set up work with the Insight Management Agents, integrated Lights-Out and Remote Insight Lights-Out Edition, and Version Control Agents to deliver robust fault, configuration, and asset management as well as remote administration. With HP SIM customers will also be able to take advantage of role-based security; the ability to manage ProLiant, Integrity, and HP 9000 systems; and plug-ins for storage, client, printer, and power management as well as server rapid deployment, performance management, and workload management. For more details on HP SIM visit http://www.hp.com/go/hpsim.

SmartStart

SmartStart is a tool that simplifies server setup, providing a rapid way to deploy reliable and consistent server configurations. For more information, please visit the SmartStart Web site at http://www.hp.com/servers/smartstart.
SmartStart version supported (minimum): SmartStart 6.40.

Management Agents | The Management Agents form the foundation for HP's Intelligent Manageability strategy. They provide direct, browser-based access to in-depth instrumentation built into HP servers, workstations, desktops, and portables, and send alerts to Systems Insight Manager and other enterprise management applications in case of subsystem or environmental failures. For additional information about the Management Agents and other management products from HP, please visit the management Web site at http://www.hp.com/servers/manage.

Subscriber's Choice

Subscriber's Choice Driver and Support Alerts/Notifications is a web-based email subscription service that provides automatic delivery of software and driver change notifications for ProLiant products. Sign up at http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become available, on a weekly or monthly basis.

ROMPaq, support software, and
configuration utilities

The latest software, drivers, and firmware fully optimized and tested for your ProLiant server and options available in SmartStart or downloadable from Software and Drivers download pages, linked from the SmartStart website at http://www.hp.com/servers/smartstart.

Survey Utility and diagnostics utilities | The most advanced configuration analysis, reporting and troubleshooting utilities used by HP and at your fingertips, available in SmartStart.

Optional ProLiant Essentials Value Packs

Optional software offerings that selectively extend the functionality of an Adaptive Infrastructure to address specific business problems and needs:

Rapid Deployment Pack - an automated solution for multi-server deployment and provisioning, enabling companies to quickly and easily adapt to changing business demands.
Workload Management Pack - provides easier management of complex environments, improving overall server utilization and enabling Windows® 2000 customers for the first time to confidently deploy multiple applications on a single multiprocessor ProLiant Server.
Integrated Lights-Out Advanced Pack - upgrades the Integrated Lights-Out processor to full virtual presence and control with graphical console and virtual media.
Performance Management Pack - a performance management solution that identifies and explains hardware performance bottlenecks on ProLiant servers and attached options enabling users to better utilize their valuable resources.
Intelligent Networking Pack - detects and analyzes network bottlenecks or broken network linkages and steers traffic to the optimum route based on network conditions, plus it provides an extra layer of protection. The virus throttle feature of the solution slows the propagation of fast spreading virus.
Vulnerability and Patch Management Pack - identifies and remediates software security vulnerabilities due to missing patches as well operating system configurations that can be exploited by viruses, worms, and other blended threats

Virtual Machine Management Pack - provides central management and control of virtual machines from Microsoft and VMware. Integrated approach provides the ability to manage both physical and virtual resources from a single management console.

NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product QuickSpecs for more information.
NOTE: For more information regarding ProLiant Essentials Software, please see the following URL: http://www.hp.com/servers/proliantessentials.

Industry Standard Compliance | ACPI 1.0a. Compliant
PCI 2.2 Compliant
PXE Support
WOL Support
Physical Address Extension (PAE) Support
Microsoft® Logo certifications

Intelligent Manageability | Integrated Lights-Out (iLO) Standard Management

Virtual Text Remote Console

Virtual Power Button Control

Dedicated LAN Connectivity

Automatic IP Configuration via DHCP/DNS/WINS

Industry Standard 128-bit Secure Sockets Layer (SSL) Security

IML and iLO Event Logging

Support for 12 user accounts with customizable access privileges

Integrated Lights-Out (iLO) Advanced Pack (supports Advanced features such as Graphical Remote Console and Virtual Floppy - available as a separate option)
Automatic Server Recovery-2 (ASR-2)
HP Systems Insight Manager
Redundant ROM
Remote Flash ROM
ROM-Based Setup Utility (RBSU)
Integrated Management Log (IML)
Hot Spare Boot
(NOTE: Upon the event of a failed processor or VRM in a multi-processing environment, the system will automatically reboot and use the remaining good processor(s).)
Dynamic sector repairing and drive parameter tracking (with Smart Array controllers)
Redundant/adaptive load balancing NIC Support

Availability

Standard Advanced ECC functionality detects and corrects single bit and specific multi-bit memory errors (4bit and 8bit) while using industry standard registered DIMMS. Functionality is embedded in the chipset design.

HP Advanced Memory Protection Technology – delivers unsurpassed memory protection and server availability:

Online Spare Memory
Offers a higher level of memory protection than Advanced ECC alone. If the number of single-bit correctable errors on a bank exceeds the pre-defined error threshold, that bank will fail over to the online spare bank without intervention or server interruption. The failed memory can then be replaced at the user's convenience during a scheduled maintenance window.

Single-Board Mirrored Memory
Single-board mirrored memory provides a higher level of availability than Advanced ECC and Online Spare Memory because it protects against multi-bit errors. Single-board Mirrored Memory uses mirrored banks on a single memory board that is configured with one redundant bank of memory. The system writes to both banks, but reads from one. If a DIMM(s) has a multi-bit error, the system simply reads from the mirrored bank instead. This process occurs without intervention or server interruption, and the failed DIMM can be replaced during a regularly scheduled shutdown.

Hot Plug Mirrored Memory
Hot Plug Mirrored Memory is a fault-tolerant memory feature that provides a higher level of availability than Advanced ECC, Online Spare Memory, or Single-Board Mirrored Memory because it protects against multi-bit errors and does not require any server downtime to replace failed DIMMs. Hot Plug Mirrored Memory requires that two memory boards be installed, one an exact mirror of the other, which run in parallel and provide protection against multi-bit memory errors. When configured for Hot Plug Mirrored Memory, the system writes to both memory boards, but reads from one. If a read error occurs, the system fails over to the redundant memory board. At that point the memory board containing the failed DIMMs can be hot replaced. Once the failed DIMMs are replaced and the memory board re-installed into the server, the system goes back to full mirrored status. All this occurs without bringing the server down.

NOTE: Hot Plug Mirrored Memory and Dual-Board Online Spare Memory require the use of two memory cards. All HP ProLiant DL580 G2 servers ship standard with a single memory board. The second memory board is optional (P/N 203320-B21).
NOTE: All HP Advanced Memory Protection modes are user configurable through the ROM-Based Setup Utility (RBSU) and viewable through HP Systems Insight Manager and the Integrated Management Log (IML.).

PCI-X Hot Plug Technology (Four 64bit/100-MHz PCI-X hot plug slots available)

Smart Array 5i Plus Controller with standard Battery Backed Write Cache (BBWC) Enabler provides transportable data protection and increases overall controller performance. Up to 64MB Battery Backed Write Cache protection available on 2P models (BBWC Enabler is optional on 1P model.)

Redundant Cooling Zones across major server subsystems (Memory, I/O, CPU) provide 7x24 cooling. Each zone is independent of each other and is able to support n+ 1 redundancy, as indicated below:

PCI-X expansion zone is 1 + 1 redundant (fans 1 and 2)

Memory zone is 1 + 1 redundant (fans 3 and 4)

CPU zone is 2 + 1 redundant (fans 5, 6, and 7)

This zone configuration enables the server to withstand up to three fan failures, provided that they are not within the same zone. Each fan is hot plug redundant and individually removable.

Up to four Hot Plug Ultra3 Drive Bays

Duplex or Simplex SCSI Backplane (Duplex configuration is standard)

Dual Hot Plug Redundant Power Supplies (standard on 2P Models, one ships standard on 1P Models)

Serviceability

Innovative Diagnostic Lighting

QuickFind Diagnostic Display – precisely depicts all major subsystems of the server (PCI-X I/O, Memory, CPU, Redundant Cooling, Interlock, Thermtrip) and gives instant visual indication of fault status. Located on top front of server.

LED display on front panel indicates power, internal health, external health, Unit ID light.

LED display on Memory board indicates Memory status, health, and protection mode.

Tool-less, virtually cable-less interior design

Tool-less access to interior of server

Two ejectable, slimline media drives (diskette and CD-ROM standard with support for optional DVD-ROM drives) are removable without the use of tools

Front access power supplies

Spring-loaded memory board release latches prevent unseating incidents

PCI Card Guides locks full length PCI cards in place during transit

SCSI Duplex/Simplex Drive Cage connects directly to system board – no cables.
NOTE: Configure your SCSI Duplex/Simplex Drive Cage by means of simple switch (duplex to simplex)
located on the cage itself. System ships standard in Duplex mode.

Seven individually removable fans connect without cables to the system board

Processor/VRM Retention Cage securely locks both processor and VRM into their respective sockets

Tool-less removal of system board

Quick Deploy Rails

Tool-less design "snap in" rail

Security

Power-on password
Keyboard password
Diskette drive control
Diskette boot control
Network Server Mode
Serial interface control
Administrator's password
Disk configuration lock
Removable Diskette drive
Removable CD-ROM drive

Power Supply

800-Watt (low line or high line) Hot Plug Power Supply
NOTE: One 800-Watt Hot Plug Power Supply ships standard with 1P Models (optional Redundant Hot Plug Power Supply Option Kit).
NOTE: Two 800-Watt Hot Plug Power Supplies ship standard with 2P Models.

UPS and PDU Power
Cord Matrix

Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and specifications for UPS and PDU units:
ftp://ftp.compaq.com/pub/products/servers/ProLiantstorage/power-protection/powercordmatrix.pdf.

System Fans | Standard | 7 Hot plug, redundant fans (individually removable)
Maximum | 7 Hot plug, redundant fans (individually removable)

Redundant Cooling Zones across major server subsystems (Memory, I/O, CPU) provide 7x24 cooling. Each zone is independent of each other and is able to support n+ 1 redundancy, as indicated below:

PCI-X expansion zone is 1 + 1 redundant (fans 1 and 2)

Memory zone is 1 + 1 redundant (fans 3 and 4)

CPU zone is 2 + 1 redundant (fans 5, 6, and 7)

This zone configuration enables the server to withstand up to three fan failures, provided that they are not within the same zone. Each fan is hot plug redundant and individually removable.

Required Cabling

For required cabling information, refer to the HP Web site at
http://h18000.www1.hp.com/products/servers/proliantDL580/.

OS Support

Windows Server 2003, Standard Edition
Windows Server 2003, Enterprise Edition
Microsoft Windows 2000 Server
Microsoft Windows 2000 Advanced Server
Microsoft NT Server 4.0 and 4.0ES, 4.0TS
Red Hat Linux RedHat Enterprise Server
SuSE Linux Enterprise Server
United Linux Novell Netware
SCO OpenUNIX
Sun Solaris Intel Platform Edition
VMware Virtualization Software

| NOTE: For a more complete and up-to-date listing of supported OSs and versions, please visit our OS Support Matrix at: http://www.hp.com/go/supportos.
| NOTE: For an up-to-date listing of the latest drivers available for the HP ProLiant DL580 G2, please see: http://www.hp.com/support/files/server/us/index.html..
| NOTE: For a more complete and up-to-date information on Linux support, please visit HP Linux Web site at http://h18000.www1.hp.com/products/servers/linux/hpLinuxcert.html.

NOTE: For more complete and up-to-date information on how to buy server operating systems from HP please visit the OS product site at: http://h18004.www1.hp.com/products/servers/software/OEM.html
NOTE: For more information on HP's Certified and Supported ProLiant Servers, please visit the VMware Server Support Matrix at: http://h18004.www1.hp.com/products/servers/software/vmware/hpvmwarecert.html.

Rack Airflow Requirements

Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.

CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment:

Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 5,350 sq cm (830 square inches) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).

Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 7 cm (2.75 inches).

CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD provided with the server, or to the server documentation located in the Support section at the following URL: http://www5.hp.com/products/servers/proliantdl580/index.html..

Rack Mounting Requirements | HP ProLiant DL580 G2 rack models provide tool-free support for square hole racks (including Compaq/HP 7000, 9000, 10000 and H9 series) with an adjustment range from 28" – 29" in depth.

Factory Express Portfolio for Servers and Storage

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSA1000, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to http://www.hp.com/go/factory-express.

Custom Builder

Please see the Enterprise Configurator for configuration assistance at: http://www.hp.com/products/configurator.

Service and Support

This product is covered by a global limited warranty and supported by HP Services and a worldwide network of resellers and service providers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Additional support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are available through HP Care Pack services or customized service agreements.
NOTE: Limited warranty includes 3 year parts, 3 year labor, 3-year on-site support.

Care Pack services provide a range of life cycle support options that let you choose the service levels that meet your business requirements, from basic to mission-critical.

A full range of HP Care Pack hardware and software services are available including:

Installation and start up

Education courses

Extended onsite hardware coverage hours from same business day 13 hours, 5 day to 24 hours, 7 days call window with options including 4-hour response or 6-hour Call To Repair

Comprehensive range of software technical support for Microsoft, Linux, ProLiant Essentials and VMWare-based IT solutions helping to deliver high level of application availability. Response times range from 30 mins for critical problems to 2 hours.

System Management, Performance Services and Mission Critical Support Solution

HP Care Pack Services include HP branded hardware options qualified for the server, purchased at the same time or afterwards, internal to the enclosure, as well as 22" and smaller external monitors and tower UPS options up to 3KVA. 22" and smaller external monitors will be covered at the same service level and coverage period as the server. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

NOTE: For more information on HP Care Pack services, contact any of our worldwide sales offices or resellers or visit our worldwide Web site on the internet at: http://www.hp.com/hps/carepack

NOTE: For more complete information on HP Services offerings, customers and resellers, please visit us at: http://www.hp.com/hps

NOTE: Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

Overview      Standard Features      Solutions      Models      Options      Memory      Storage      Power Specifications      Technical Specifications

Solutions

Solutions

Designed for enterprise customers with growing data centers and application and Internet service providers that require a rack optimized 4 processor server that delivers maximum performance and high availability for highly complex, business critical applications. Specifically, the HP ProLiant DL580 G2 would be excellent for running the following types of applications:
Typical Usage:

Databases
Large Scale Mail Servers
ERP/CRM/SCM

For more solutions visit: http://www.hp.com/solutions/proliantdl580.

Overview      Standard Features      Solutions      Models      Options      Memory      Storage      Power Specifications      Technical Specifications

Models

DL580R02 X3.0 GHz-4MB, 2048MB (2P)
347905-001

Processor(s)

(2) Intel Xeon Processors MP at 3.0 GHz standard (up to 4 supported)

Cache Memory | 4MB Integrated Level 3 Cache

Memory

2048 MB PC1600 registered ECC SDRAM (Standard) to 32 GB (Maximum)
(4x1 interleaved memory and HP Advanced Memory Protection Technology)

Network Controller | Integrated dual port NC7170 PCI-X Gigabit Server Adapter in a slot
Storage Controller | Smart Array 5i Plus Controller (Dual Channel, Ultra3) with Battery-Backed Write Cache Enabler (integrated on system board)
Manageability | Integrated Lights-Out (iLO) Standard management (integrated on system board)
Hard Drives | None ship standard
Internal Storage | 1.20 TB maximum (with optional hard drives)
Power Supply | Two 800W Hot Plug Redundant Power Supplies (low line or high line)
Optical Drive | 24x IDE slimline CD-ROM Drive
Diskette Drive | 1.44 MB Diskette Drive (slimline)
Form Factor | Rack 4U

DL580R02 X2.7 GHz-2MB, 2048MB (2P)
347904-001

Processor(s)

(2) Intel Xeon Processors MP at 2.7 GHz standard (up to 4 supported)

Cache Memory | 2MB Integrated Level 3 Cache

Memory

2048 MB PC1600 registered ECC SDRAM (Standard) to 32 GB (Maximum)
(4x1 interleaved memory and HP Advanced Memory Protection Technology)

Network Controller | Integrated dual port NC7170 PCI-X Gigabit Server Adapter in a slot
Storage Controller | Smart Array 5i Plus Controller (Dual Channel, Ultra3) with Battery-Backed Write Cache Enabler (integrated on system board)
Manageability | Integrated Lights-Out (iLO) Standard management (integrated on system board)
Hard Drives | None ship standard
Internal Storage | 1.20 TB maximum (with optional hard drives)
Power Supply | Two 800W Hot Plug Redundant Power Supplies (low line or high line)
Optical Drive | 24x IDE slimline CD-ROM Drive
Diskette Drive | 1.44 MB Diskette Drive (slimline)
Form Factor | Rack 4U

DL580R02 X2.2 GHz-2MB, 1024MB (1P)
347903-001

Processor(s)

(1) Intel Xeon Processors MP at 2.2 GHz standard (up to 4 supported)

Cache Memory | 2MB Integrated Level 3 Cache

Memory

1024 MB PC1600 registered ECC SDRAM (Standard) to 32 GB (Maximum)
(4x1 interleaved memory and HP Advanced Memory Protection Technology)

Network Controller | Integrated dual port NC7170 PCI-X Gigabit Server Adapter in a slot
Storage Controller | Smart Array 5i Plus Controller (Dual Channel, Ultra3) (integrated on system board)
Manageability | Integrated Lights-Out (iLO) Standard management (integrated on system board)
Hard Drives | None ship standard
Internal Storage | 1.20 TB maximum (with optional hard drives)
Power Supply | One 800W Hot Plug Redundant Power Supplies (low line or high line)
Optical Drive | 24x IDE slimline CD-ROM Drive
Diskette Drive | 1.44 MB Diskette Drive (slimline)
Form Factor | Rack 4U

Overview      Standard Features      Solutions      Models      Options      Memory      Storage      Power Specifications      Technical Specifications

Options

HP ProLiant DL580 Unique Options

8 GB PC1600 Registered ECC SDRAM Memory Kit (4 x 2048 MB)

202173-B21

4 GB PC1600 Registered ECC SDRAM Memory Kit (4 x 1024 MB)

202172-B21

2 GB PC1600 Registered ECC SDRAM Memory Kit (4 x 512 MB)

202171-B21

1 GB PC1600 Registered ECC SDRAM Memory Kit (4 x 256 MB)

202170-B21

Hot Plug Memory Expansion Board
NOTE: The Hot Plug Memory Expansion Board provides 8 additional DIMM slots for powering memory-intensive applications.

203320-B21

800W Hot Plug Redundant Power Supply US

278535-001

800W Hot Plug Redundant Power Supply -inc IEC

278535-B21

DL580 G2 24" - 19" Rack Adapter Kit | 332815-B21

DL580 G2 Folding Cable Management Arm

289294-B21

DL580 G2 Cable Assembly, SCSI, Ultra3, LVDS
NOTE: All HP ProLiant DL580 G2 models ship standard with the integrated Smart Array 5i Plus Controller, which has been designed to deliver maximum performance and availability across the internal SCSI Duplex backplane.

288874-B21

The Ultra3 SCSI cable is required only if the customer chooses to bypass the Smart Array 5i Plus Controller and connect slot-based SCSI adapters or RAID controllers to the internal SCSI Duplex backplane.

Two cables are required to maintain the standard, duplexed configuration of the backplane.

One cable is required if the simplex configuration is chosen

The backplane is easily configured to simplex mode by means of a simple switch duplex to simplex) located on the top of the backplane itself.

Cord, AC Line, 20A, 250V, US 12'

235604-001

Cord, AC Line, 15A, 125V

235603-001

Cable, 10A, IEC320-C20 to IEC320-C19
NOTE: Power cord (295633-B22) connects ProLiant servers to PDUs or UPSs with IEC320-C19 output connections.

295633-B22

Cable, 10A, IEC320-C14 to IEC320-C19 8FT
NOTE: Power cord (291034-B21) connects HP ProLiant DL580 G2 servers to PDUs or UPSs with IEC320-C13 output connections. This power cord has been specifically designed to work with the HP ProLiant DL580 G2 server. Please NOTE the following important precautions when deploying this power cord:

291034-B21

Use the cord only in conjunction with the HP ProLiant DL580 G2 server.

Use the cord to connect the HP ProLiant DL580 G2 server only to PDUs or UPSs with IEC320-C13 output connections.

Do not use the cord with any other HP ProLiant or third party server.

Do not use the cord with any other office equipment or computers.

Do not use the cord as an extension cord.

Do not plug the cord into a wall outlet.
Failure to adhere to these precautions may invalidate the server warranty.

Cable, 10A, IEC320-C14 to IEC320-C19 10FT
NOTE: Power cord (310927-B21) connects HP ProLiant DL580 G2 servers to PDUs or UPSs with IEC320-C13 output connections. This power cord has been specifically designed to work with the HP ProLiant DL580 G2 server. Please NOTE the following important precautions when deploying this power cord:

310927-B21

Use the cord only in conjunction with the HP ProLiant DL580 G2 server.

Use the cord to connect the HP ProLiant DL580 G2 server only to PDUs or UPSs with IEC320-C13 output connections.

Do not use the cord with any other HP ProLiant or third party server.

Do not use the cord with any other office equipment or computers.
Do not use the cord as an extension cord.
Do not plug the cord into a wall outlet.
Failure to adhere to these precautions may invalidate the server warranty

Cable, 10A, IEC320-C14 to IEC320-C19 6FT
NOTE: Power cord (313227-B21) connects HP ProLiant DL580 G2 servers to PDUs or UPSs with IEC320-C13 output connections. This power cord has been specifically designed to work with the HP ProLiant DL580 G2 server. Please NOTE the following important precautions when deploying this power cord

313227-B21

Use the cord only in conjunction with the HP ProLiant DL580 G2 server.

Use the cord to connect the HP ProLiant DL580 G2 server only to PDUs or UPSs with IEC320-C13 output connections.

Do not use the cord with any other HP ProLiant or third party server.

Do not use the cord with any other office equipment or computers.
Do not use the cord as an extension cord.
Do not plug the cord into a wall outlet.
Failure to adhere to these precautions may invalidate the server warranty

Cable, 10A, IEC320-C14 to IEC320-C19 12FT
NOTE: Power cord (313228-B21) connects HP ProLiant DL580 G2 servers to PDUs or UPSs with IEC320-C13 output connections. This power cord has been specifically designed to work with the HP ProLiant DL580 G2 server. Please NOTE the following important precautions when deploying this power cord:

313228-B21

Use the cord only in conjunction with the HP ProLiant DL580 G2 server.

Use the cord to connect the HP ProLiant DL580 G2 server only to PDUs or UPSs with IEC320-C13 output connections.

Do not use the cord with any other HP ProLiant or third party server.

Do not use the cord with any other office equipment or computers.
Do not use the cord as an extension cord.
Do not plug the cord into a wall outlet.
Failure to adhere to these precautions may invalidate the server warranty

ProLiant Essentials
Value Pack Software

ProLiant Essentials Integrated Lights-Out Advanced Pack

ProLiant Essentials Integrated Lights-Out Advanced Pack, 1 server
Featuring: sophisticated virtual administration features for ultimate control of servers in the data centers and remote sites.

263825-B21

NOTE: For additional ProLiant Integrated Light-Out Advanced Pack License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11052_na/11052_na.html

ProLiant Essentials Intelligent Networking Pack

ProLiant Essentials Intelligent Networking Pack, Single Server License
NOTE: For use with a single server. Contains one license with a unique license activation key and documentation.

372906-B21

NOTE: For additional ProLiant Intelligent Networking Pack - Windows License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12062_na/12062_na.html |

ProLiant Essentials Intelligent Networking Pack - Linux Edition, Single Server License

397004-B21

NOTE: For additional ProLiant Intelligent Networking Pack - Linux License Kits please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12327_na/12327_na.html

ProLiant Essentials Performance Management Pack

ProLiant Essentials Performance Management Pack, Single-Server License
NOTE: For use with a single server. Contains one license with a unique license activation key, HP Management CD and documentation.
NOTE: The most recent version of the software can always be downloaded at http://www.hp.com/products/pmp.

306696-B21

NOTE: For additional ProLiant Performance Management Pack License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11052_na/11052_na.html

ProLiant Essentials Rapid Deployment Pack Windows Edition and Linux Edition Release

Rapid Deployment Pack, Single-Server License
NOTE: This license allows 1 server to be deployed and managed via RDP.

267196-B21

NOTE: For additional ProLiant Essentials Rapid Deployment Pack License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11053_na/11053_na.html%20
http://h18000.www1.hp.com/products/quickspecs/11713_na/11713_na.html

ProLiant Essentials Workload Management Pack

ProLiant Essentials Workload Management Pack, Single Server License

303284-B21

NOTE: For additional ProLiant Workload Management Pack License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11452_na/11452_na.html%20

ProLiant Essentials Virtual Machine Management Pack

ProLiant Essentials Virtual Machine Management Pack, Single-Server License
NOTE: For use with a single server. Contains one license with a unique license activation key and documentation.

372214-B21

NOTE: For additional ProLiant Virtual Machine Management Pack License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12110_na/12110_na.html |

ProLiant Essentials Vulnerability and Patch Management Pack

ProLiant Essentials Vulnerability and Patch Management Pack, Single-Server License
NOTE: For use with a single server. Contains one license with a unique license activation key and documentation.

371645-B21

NOTE: For additional ProLiant Vulnerability and Patch Management Pack License Kits, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12111_na/12111_na.html

NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product QuickSpecs for more information.
NOTE: For more information regarding ProLiant Essentials Software, please see the following URL: http://www.hp.com/servers/proliantessentials.

Processor

Intel Xeon MP X3.00 GHz-4MB Processor Option Kit
NOTE: This processor option kit (PN 345323-B21) supports the HP ProLiant ML570 G2 and the HP ProLiant DL580 G2.

345323-B21

Intel Xeon MP X2.70 GHz-2MB Processor Option Kit
NOTE: This processor option kit (PN 345322-B21) supports the HP ProLiant ML570 G2 and the HP ProLiant DL580 G2.

345322-B21

Intel Xeon MP X2.20 GHz-2MB Processor Option Kit
NOTE: This processor option kit (PN 345321-B21) supports the HP ProLiant ML570 G2 and the HP ProLiant DL580 G2.

345321-B21

Intel Xeon MP X2.80 GHz-2MB Processor Option Kit
NOTE: This processor option kit (PN 325254-B21) supports the HP ProLiant ML570 G2 and the HP ProLiant DL580 G2.

325254-B21

Intel Xeon MP X2.50 GHz-1MB Processor Option Kit
NOTE: This processor option kit (PN 325253-B21) supports the HP ProLiant ML570 G2 and the HP ProLiant DL580 G2.

325253-B21

Intel Xeon MP X2.0 GHz-1MB Processor Option Kit
NOTE: This processor option kit (PN 325252-B21) supports the HP ProLiant ML570 G2 and the HP ProLiant DL580 G2.

325252-B21

Memory (DIMMs)

8 GB PC1600 Registered ECC SDRAM Memory Kit (4 x 2048 MB)

202173-B21

4 GB PC1600 Registered ECC SDRAM Memory Kit (4 x 1024 MB)

202172-B21

2 GB PC1600 Registered ECC SDRAM Memory Kit (4 x 512 MB)

202171-B21

1 GB PC1600 Registered ECC SDRAM Memory Kit (4 x 256 MB)

202170-B21

Hot Plug Memory Expansion Board
NOTE: The Hot Plug Memory Expansion Board provides 8 additional DIMM slots for powering memory-intensive applications.

203320-B21

Optical Drives

Slimline CD-RW/DVD-ROM Combo Drive Option Kit
NOTE: Ejectable drive.

331903-B21

Slimline DVD-ROM Drive (8X/24X) Option Kit (Servers)
NOTE: Ejectable drive.

264007-B21

HP DVD+R/RW 8X Slim | 383975-B21

Hard Drives

Ultra320 SCSI - Universal Hot Plug

300-GB 10,000 rpm U320 Universal Hard Drive (1")

350964-B22

146.8-GB 10,000 rpm U320 Universal Hard Drive (1")

286716-B22

72.8-GB 10,000 rpm U320 Universal Hard Drive (1")

286714-B22

146.8-GB 15,000 rpm U320 Universal Hard Drive (1")

347708-B22

72.8-GB 15,000 rpm U320 Universal Hard Drive (1")

286778-B22

36.4-GB 15,000 rpm U320 Universal Hard Drive (1")

286776-B22

NOTE: All U320 Universal Hard Drives are backward compatible to U2 or U3 speeds. U320 drives require an optional U320 Smart Array Controller or U320 SCSI HBA to support U320 transfer rates.

NOTE: Please see the Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
U320 Hard Drive QS:
http://h18000.www1.hp.com/products/quickspecs/11531_na/11531_na.html

Storage Controllers

Smart Array 6402/128 Controller

273915-B21

Smart Array 6404/256 Controller | 273914-B21

512MB DDR BBWC Upgrade

372538-B21

Smart Array 641 Controller

291966-B21

Smart Array 642 Controller

291967-B21

256MB Battery-Backed Cache Module
NOTE: This 256-MB Battery-Backed Cache Module supports the Smart Array 5300 series controllers, HP Modular Smart Array 1000 and the HP Modular Smart Array 500.

254786-B21

Battery-Backed Write Cache Enabler Option Kit
NOTE: This Battery-Backed Write Cache Enable Option Kit (PN 255514-001) is optional for the 1P Model only.

255514-B21

128MB Battery-Backed Cache Enabler
NOTE: This 128MB BBWC supports the Smart Array 641 Controller and Smart Array 642 Controller.

351580-B21

DL580 G2 Cable Assembly, SCSI, Ultra3, LVDS
NOTE: All DL580 G2 models ship standard with the integrated Smart Array 5i Plus Controller, which has been designed to deliver maximum performance and availability across the internal SCSI Duplex backplane.

288874-B21

The Ultra3 SCSI cable is required only if the customer chooses to bypass the Smart Array 5i Plus Controller and connect slot-based SCSI adapters or RAID controllers to the internal SCSI Duplex backplane.

Two cables are required to maintain the standard, duplexed configuration of the backplane.

One cable is required if the simplex configuration is chosen.

The backplane is easily configured to simplex mode by means of a simple switch duplex to simplex) located on the top of the backplane itself. |

64-Bit/133-MHz Dual Channel Ultra320 SCSI Adapter

268351-B21

64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate OS

284688-B21

Smart Array 6404/256 Controller

273914-B21

Ultra320 Expansion Module for SA-6402

273911-B21

NOTE: Please see the following Controller or SCSI Adapter QuickSpecs for Technical Specifications such as PCI Bus, PCI Peak Data Transfer Rate, SCSI Protocols supported, SCSI Peak Data Transfer Rate, Channels, SCSI Ports, Drives supported, Cache, RAID support, and additional information:
http://h18000.www1.hp.com/products/quickspecs/11587_na/11587_na.html
(Smart Array 6400 Series)
http://h18000.www1.hp.com/products/quickspecs/12067_na/12067_na.html
(Smart Array 641)
http://h18000.www1.hp.com/products/quickspecs/12069_na/12069_na.html
(Smart Array 642)
http://h18000.www1.hp.com/products/quickspecs/10429_na/10429_na.html
(SCSI Adapter)
http://h18000.www1.hp.com/products/quickspecs/11555_na/11555_na.html
(U320 Adapter)

Communications

HP NC310F PCI-X 1000SX Gigabit Server Adapter

368169-B21

HP NC7170 PCI-X Dual Port 1000T Gigabit Server Adapter

313881-B21

HP NC7771 PCI-X 1000T Gigabit Server Adapter

290563-B21

HP NC570C PCI-X Dual-port 4x Fabric Adapter

376158-B21

HP 24-Port 4x Fabric Copper Switch

376227-B21

HP 1m 4x Fabric Copper Cable

376232-B21

HP 3m 4x Fabric Copper Cable

376232-B22

HP 5m 4x Fabric Copper Cable

376232-B23

Redundant Options

800W Hot Plug Redundant Power Supply

278535-001

800W Hot Plug Redundant Power Supply -inc IEC

278535-B21

Management Options

Remote Insight Lights-Out Edition II

227251-001

Tape Drives

NOTE: For the complete listing of Tape drive offerings for this server, please visit:
http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html

For recommended tape drive offerings for this ProLiant server see the following:

Hot Plug Tape Drives

HP StorageWorks DAT 72 SCSI Hot-plug Tape Drive (Carbon)

Q1529A

USB Tape Drives

HP StorageWorks DAT 72 USB External Tape Drive (Carbonite)

DW027A

External and Rack-Mount Ultrium Tape Drives

HP StorageWorks Ultrium 232 Internal Tape Drive (Carbonite)
NOTE: No internal tape drives fit inside this HP ProLiant server (except hot plug tape). The internal drive shown here is for the 1U and 3U Rack-mount Kit.

DW064A

HP StorageWorks Ultrium 232 External Tape Drive (Carbonite)

DW065B

HP StorageWorks Ultrium 460 External Tape Drive (Carbon)

Q1520A

HP StorageWorks Ultrium 448 External Tape Drive (Carbonite)

DW017B

HP StorageWorks 1U Rack-mount kit with one Ultrium 448 (Carbonite)

DW028A

HP StorageWorks Ultrium 960 External Tape Drive (Carbonite)

Q1539B

HP StorageWorks 3U Rack-mount kit with one Ultrium 960 (Carbonite)

Q1595A

NOTE: Please see the HP StorageWorks Ultrium Tape Drive QuickSpecs for additional options such as controllers, media, and other related items:
http://h18006.www1.hp.com/products/quickspecs/11739_na/11739_na.html
For an up-to-date listing of the latest O/S and software support details for HP Ultrium tape drives, please visit: http://www.hp.com/go/connect.

Rack-Mount Tape Drive Enclosures

HP StorageWorks 1U Rack-Mount Kit
NOTE: The 1U Rack-mount Kit can support up to (2) half-height tape drives and compatible with multiple Single-Ended and LVD SCSI tape drives including the DAT 24, DAT 40, DAT 72, DLT VS80, DLT VS160, Ultrium 215, Ultrium 232 and Ultrium 448 tape drives.

A7445B

HP StorageWorks 1U USB Rack-Mount Kit

A8007A

1U USB Cable Option Kit
NOTE: Converts a 1U SCSI rack-mount kit to a USB interface to support the USB tape drives.

396114-B21

HP StorageWorks 3U Rack-Mount Kit
NOTE: The 3U Rack-mount Kit can support up to (2) full-height or (4) half-height tape drives and compatible with multiple Single-Ended and LVD SCSI tape drives including DAT 24, DAT 40, DAT 72, DLT VS80, DLT VS160, SDLT 320, SDLT 600, Ultrium 215, Ultrium 230, Ultrium 232, Ultrium 460, Ultrium 448 and Ultrium 960 tape drives.

274338-B23

NOTE: Please see the Rack-Mount Tape Drive Kits QuickSpecs for additional information regarding these kits:
http://h18000.www1.hp.com/products/quickspecs/10854_na/10854_na.html

Tape Autoloaders

DAT Autoloader

HP StorageWorks DAT 72x6 Autoloader (External)

Q1567A

NOTE: Please see the DAT 72x6 Tape Autoloader QuickSpecs for additional options such as host bus adapters, controllers and media:
http://h18006.www1.hp.com/products/quickspecs/11905_na/11905_na.html

HP StorageWorks 1/8 Tape Autoloader

HP StorageWorks 1/8 Ultrium 960 Tape Autoloader | AF204A
HP StorageWorks 1/8 Ultrium 448 Tape Autoloader | AF203A
HP StorageWorks 1/8 SDLT 320 Tape Autoloader | AA926A
HP StorageWorks 1/8 Ultrium 232 Tape Autoloader | AF202A

1/8 Tape Autoloader Rackmount Kit
NOTE: Required to install the unit in a standard 19-inch rack; includes rails and rackmount instructions

C9268R

NOTE: Please reference the 1/8 Tape Autoloader QuickSpecs at http://www.hp.com/go/automation for additional information needed to create a complete solution; reference current compatibility information at http://www.hp.com/go/ebs |
HP StorageWorks SSL1016 Tape Autoloader |
HP StorageWorks SSL1016 Ultrium 460 Tape Autoloader | 330821-B21
HP StorageWorks SSL1016 SDLT 320 Tape Autoloader | 330816-B21

NOTE: Please reference the SSL1016 Tape Autoloader QuickSpecs at http://www.hp.com/go/automation for additional information needed to create a complete solution; reference current compatibility information at http://www.hp.com/go/ebs

Tape Libraries

HP StorageWorks MSL2024 Tape Library

HP StorageWorks MSL2024 1 Ultrium 960 Drive Library | AG115A
HP StorageWorks MSL2024 1 Ultrium 448 Drive Library | AG116A
HP StorageWorks MSL2024 2 Ultrium 448 Drive Library | AG117A
|
HP StorageWorks MSL6000 Tape Library |
|
Ultrium 960 technology |
HP StorageWorks MSL6030 1 Ultrium 960 Dr LVDS Library | AD606A
HP StorageWorks MSL6030 1 Ultrium 960 Dr FC Library | AD608A
HP StorageWorks MSL6030 2 Ultrium 960 Dr LVDS Library | AD607A
HP StorageWorks MSL6030 2 Ultrium 960 Dr FC Library | AD609A
Ultrium 460 technology |
HP StorageWorks MSL6030 1 Ultrium 460 Dr LVDS Library | AD598A
HP StorageWorks MSL6030 1 Ultrium 460 Dr FC Library | AD600A
HP StorageWorks MSL6030 2 Ultrium 460 Dr LVDS Library | AD599A
HP StorageWorks MSL6030 2 Ultrium 460 Dr FC Library | AD601A
NOTE: Please reference the MSL2024 and MSL6000 Tape Library QuickSpecs at http://www.hp.com/go/automation for additional information needed to create a complete solution; reference current compatibility information at http://www.hp.com/go/ebs. |

Magneto-Optical Jukeboxes

HP StorageWorks 9.1 GB Optical Jukeboxes

600mx, 4 drive, 64 slot jukebox | C1160M
1200mx, 4 drive, up to 128 slots | C1104M
2200mx, 6 drive, up to 238 slots | C1107M

NOTE: Please see the HP StorageWorks Magneto-Optical Products data sheet for a complete listing of available jukeboxes at:
http://www.hp.com/products1/storage/products/archivalprod/brochures/
MO_family_pb.pdf
NOTE: Please reference the Magneto-Optical Jukebox data sheets at http://www.hp.com/go/optical for additional information needed to create a complete solution.

Ultra Density Optical Jukeboxes

1900ux, 4 drive, 64 slot jukebox

AA966A

3800ux, 4 drive, 128 slot jukebox | AA969A
7100ux, 6 drive, 238 slot jukebox | AA971A

NOTE: Please see the HP StorageWorks Ultra Density Optical Jukeboxes QuickSpecs for a complete listing of available jukeboxes at:
http://h18006.www1.hp.com/products/quickspecs/11944_div/11944_div.html
NOTE: Please reference the Ultra Density Optical Jukebox QuickSpecs at http://www.hp.com/go/optical for additional information needed to create a complete solution

Cluster Options

ProLiant Cluster Starter Kit

364023-B21

NOTE: For additional information regarding the ProLiant Cluster Starter Kit please see the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11935_na/11935_na.html

ProLiant Cluster Kit with OpenView Storage Mirroring

364025-B21

NOTE: For additional information regarding the ProLiant Cluster Kit with OpenView Storage Mirroring please see the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11934_na/11934_na.html

HP HA/F200 for Entry SAN Cluster

364026-B22

NOTE: For additional information regarding the ProLiant Cluster for Entry Level SAN please see the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11932_na/11932_na.html

ProLiant Cluster HA/F500 for the Enterprise SAN | 364024-B21

NOTE: For additional information regarding the ProLiant Cluster HA/F500 for Enterprise SAN please see the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11933_na/11933_na.html

HP Serviceguard for Linux ProLiant Cluster A.11.15 for SUSE SLES 8 / UnitedLinux 1.0 and Red Hat EL 3 (2 node license cluster kit)

305199-B24

HP Serviceguard for Linux ProLiant Cluster A.11.16 for SUSE SLES 9 and Red Hat EL & 4 (2 node license cluster kit)

305199-B26

HP Serviceguard for Linux License A.11.15 for SUSE SLES 8 / UnitedLinux 1.0 and Red Hat EL 3 (single license version)

307754-B24

HP Serviceguard for Linux A.11.16 for SUSE SLES9 and Red Hat EL 3 & 4 (single license version) | 307754-B26

NOTE: For additional information regarding the HP Serviceguard for Linux License, please see the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11518_na/11518_na.html

HP StorageWorks Modular Smart Array 20

HP StorageWorks Modular Smart Array 20
NOTE: Rack-mountable 12 (SATA) drive enclosure with U320 Host connectivity, redundant power supplies.

335921-B21

HP StorageWorks Modular Smart Array 20 Starter Kit
NOTE: Rack-mountable 12 (SATA) drive enclosure with U320 Host connectivity, redundant power supplies. Includes Smart Array 6402/128 Controller.

366172-B21

NOTE: The Modular Smart Array Enclosure 20 Family supports the SATA 1.5Gb/s 1" Hot Plug Hard Drives. |

HP StorageWorks Modular Smart Array 30

HP StorageWorks Modular Smart Array 30 SB
NOTE: Rack-mountable 14 drive enclosure with single bus, redundant power supplies

302969-B21

HP StorageWorks Modular Smart Array 30 DB
NOTE: Rack-mountable 14 drive enclosure with dual bus, redundant power supplies

302970-B21

NOTE: The Modular Smart Array Enclosure 30 Family supports the Wide Ultra3, Ultra320 1" Hot Plug Hard Drives. |

HP StorageWorks Modular Smart Array 500 G2

HP StorageWorks Modular Smart Array 500 Generation 2

335880-B21

NOTE: Please see the Modular Smart Array 500 Generation 2 QuickSpecs for additional information including configuration steps and additional options needed for a complete solution at:
http://h18000.www1.hp.com/products/quickspecs/11956_na/11956_na.html

HP StorageWorks Modular Smart Array 1000

HP StorageWorks Modular Smart Array 1000

201723-B22

NOTE: Please see the Modular Smart Array 1000 QuickSpecs for additional options and configuration information at
http://h18000.www1.hp.com/products/quickspecs/11033_na/11033_na.html

HP StorageWorks Modular Smart Array 1500 cs

Modular Smart Array 1500 Controller Shelf

AA986A

NOTE: Please see the StorageWorks Modular SAN Array 1500 cs QuickSpecs for additional options and configuration information at:
http://www.hp.com/go/MSA1500cs

StorageWorks Options

StorageWorks SAN Switch 2/8-EL Upgrade Kit

325888-B21

StorageWorks SAN Switch 2/16-EL Upgrade Kit

325889-B21

StorageWorks Director 2/64

286809-B21

NOTE: Please see the StorageWorks Director 2/64 QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/11003_na/11003_na.html

Uninterruptible Power Systems – Rack

HP UPS R1500 XR (1440VA, 1340 Watt), Low Voltage

204404-001

HP UPS R3000 XR (2880VA, 2700 Watt), Low Voltage

192186-001

HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage

192186-002

HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (16A IEC309 Plug)

192186-B32

HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (16A CEE 7/7 SCHUKO Plug)

192186-B33

HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (16A BS-546 Plug)

192186-AR1

HP UPS R5500 XR, (5000VA, 4500 Watt), High Voltage | 326529-D71

HP UPS R12000 XR N+x (200-240V) (WW-hardwired)
NOTE: The UPS R12000 XR has a hardwired input and output; requires a 100A circuit.

207552-B22

HP Monitored Power Distribution Unit
(PDU)

HP Monitored Power Distribution Unit: Full Rack Version

HP PDU with Power Monitoring, Model S2324 - dual input, 3-phase, 24A

370959-D71

HP Power Distribution Unit with Power Monitoring Model S1324 - single input, 3 phase, 24A

370960-D71

HP Power Distribution Unit with Power Monitoring Model S2140 - dual input, 1 phase, 40A

370961-D71

HP Power Distribution Unit with Power Monitoring Model S1140 - single input, 1 phase, 40A

370962-D71

Modular Power Distribution Units 1U/0U
(Up to 32 outlets)
NOTE: 1U/0U mounting brackets shipped with
the unit (optimized for 10000 and 9000 series racks).

Modular Power Distribution Units (mPDU), Low Volt Model, 24A (100-127 VAC)
NOTE: This model has a detachable input power cord and is adaptable to country specific requirements. The 16A PDU also connects to the high volt models of the UPS R3000 XR and R6000 models. Cable P/N 340653-001 required if connecting to UPS R3000 XR (192186-002 NA -High Volt model only).

252663-D71

Modular Power Distribution Units (mPDU), High Volt Model, 24A (200-240 VAC)
NOTE: L6-30 input.

252663-D72

NOTE: Please see the following Modular Power Distribution Unit (Zero-U/1U Modular PDUs) QuickSpecs for additional options including cables:
http://h18000.www1.hp.com/products/quickspecs/11041_na/11041_na.html

USB Options

USB 2-Button Optical Scroll Mouse (Carbonite/Silver)

DC172B

USB 1.44-MB External Diskette Drive (Carbonite)

DC141B

Third Party Rack Kit

3rd Party Rack Kit
NOTE: The rack kit (PN 287528-B21) provides support for any rack, square hole or round hole, (including HP Rack System /E and HP Systems), with an adjustment range from 23 ½" - 34" deep.
NOTE: The Third party rack kit is required for round hole racks or for square hole racks that do not conform to the adjustment range of the standard rail that ships with the server.

287528-B21

Telco Rack Support

Rack Adapter Kit
NOTE: This kit allows HP rack servers to fit in racks that are 24" wide.

332815-B21

NOTE: Support for all 2-post Telco racks requires the Third Party option kit 287528-B21, plus an additional option kit from Rack Solutions. The Rack Solutions brackets can be purchased at: http://www.racksolutions.com/hp. |

HP Rack 5000 Series (Graphite Metallic)

HP 5642 Rack-Unassembled

358254-B21

Rack Options for Rack 5000 Series

Stabilizer Kit for 5642 rack (Graphite Carbon)
NOTE: The stabilizing kit is used to prevent rack from tipping over.

374493-B21

Baying Kit for 5642 rack (Graphite Carbon)
NOTE: The baying kit is used to join two or more HP 5642 racks.

374499-B21

HP Rack 10000 Series
(Graphite Metallic)

10642 (42U) Infrastructure Rack (Low Voltage)

379006-001

10642 (42U) Infrastructure Rack (High Voltage)

379005-001

HP Rack S10614 (14U) Rack Cabinet – Shock Pallet

292302-B22

HP Rack 10842 (42U, 800mm wide) – Pallet

257415-B21

HP Rack 10842 (42U, 800mm wide) – Shock Pallet

257415-B22

HP Rack 10647 (47U) – Pallet

245160-B21

HP Rack 10647 (47U) – Crated

245160-B23

HP Rack 10642 (42U) – Pallet

245161-B21

HP Rack 10642 (42U) – Shock Pallet

245161-B22

HP Rack 10642 (42U) – Crated

245161-B23

HP Rack 10636 (36U) – Pallet

245162-B21

HP Rack 10636 (36U) – Shock Pallet

245162-B22

HP Rack 10636 (36U) – Crated

245162-B23

HP Rack 10622 (22U) – Pallet

245163-B21

HP Rack 10622 (22U) – Shock Pallet

245163-B22

HP Rack 10622 (22U) – Crated

245163-B23

NOTE: -B21 (pallet) used to ship empty racks shipped on a truck
-B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and Channels)
-B23 (crated) used for air shipments of empty racks

NOTE: Please see the Rack 10000 QuickSpecs for Technical Specifications such as height, width, depth, weight, and color:
http://h18000.www1.hp.com/products/quickspecs/10995_na/10995_na.html

NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://h18000.www1.hp.com/products/servers/proliantstorage/rack-options/index.html.

Rack Options for HP
Rack 10000 Series

HP Rack Light Kit (Neon)

361589-B21

HP Rack Plinth Kit (Carbon)

251960-B21

42U Side Panel – Graphite Metallic

246099-B21

36U Side Panel – Graphite Metallic

246102-B21

47U Side Panel – Graphite Metallic

255486-B21

TFT7210R Rack Mounted 17" Monitor
NOTE: For a complete list of Monitors please view the following URL:
http://h18004.www1.hp.com/products/monitors/.

348373-B21

TFT5600 Rack Keyboard Monitor
NOTE: For a complete list of Monitors please view the following URL:
http://h18004.www1.hp.com/products/monitors/.

221546-001

1U Rack Keyboard & Drawer (Carbon)

257054-001

HP KVM Switch Options

IP Console Switch Box (KVM/IP), 3 x 1 x 16

262586-B21

IP Console Switch Box (KVM/IP), 1 x 1 x 16

262585-B21

Server Console Switch (KVM), 0 x 1 x 8 port

336044-B21

Server Console Switch (KVM), 0 x 2 x 16 port

336045-B21

PS/2 Interface Adapter, 1 pack

262588-B21

PS/2 Interface Adapter, 8 pack

262587-B21

USB Interface Adapter, 1 pack

336047-B21

Serial Interface adapter - 1 Pack with power supply

373035-B21

NOTE: Cat5e cables are required to connect Interface Adapters to Console Switches. Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm.

HP 1x 4 USB/PS2 KVM Switch, TT

371301-D71

HP 1x 4 USB/PS2 KVM Switch, RM

371302-B21

HP PS2 KVM Cable with audio, 6', 2-pack

371730-B21

HP USB KVM Cable with audio, 6', 2-pack

371729-B21

NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.

HP Serial Console Server Options

HP 16 Port Serial Console Server

AF101A

HP 48 Port Serial Console Server

AF102A

Serial Adapter, RJ45-DB9 DCE Female, 1 Pack

AF103A

Serial Adapter, RJ45-DB9 DCE Female, 8 Pack

AF110A

NOTE: Cat5e cables are required to connect Serial Adapters to Serial Console Servers. Additional Serial Adapters and Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm. |
NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm. |

Service and Support Offerings (HP Care Pack Services)

Hardware Services On-site Service |

4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic

U4607E

4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic

U4608E

6-Hour Call to Repair, On-site Service 7-Day x 24-Hour Coverage, 3 Years (U.S. Part Number)

6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic

U4609E

Installation & Start-up Services

Hardware Installation, Electronic

U4617E

Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays, Electronic

U4618E

Support Plus |

Onsite HW support, 8am-9pm, M-F, 4hr response and Microsoft O/S SW Tech support offsite, onsite at HP's discretion, 8am-9pm, M-F 2hr response time excl. HP holidays, Electronic

U4619E

Onsite HW support, 8am-9pm, M-F, 4hr response and Linux O/S SW Tech support offsite, onsite at HP's discretion, 8am-9pm, M-F 2hr response time excl. HP holidays, Electronic

U4621E

Support Plus 24

Onsite HW support 24x7, 4hr response and Microsoft O/S SW Tech support offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic

U4620E

Onsite HW support 24x7, 4hr response and Linux O/S SW Tech support offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic

U4622E

NOTE: For more information, customer/resellers can contact: http://www.hp.com/services/carepack |

Overview      Standard Features      Solutions      Models      Options      Memory      Storage      Power Specifications      Technical Specifications

Memory

HP ProLiant DL580 G2 2P Models

Standard Memory
2048 MB 200MHz Double Data Rate (DDR) SDRAM (PC1600 Registered SDRAM Memory with Advanced ECC functionality)

Standard Memory Plus Optional Memory and Optional Memory board
Up to 26,624 MB memory is available with the optional installation of PC1600 Registered ECC SDRAM Memory kits and a second, optional memory board.
Standard Memory Replaced with Optional Memory and Optional memory board
Up to 32,768 MB of memory is available with the removal of the standard 2048 MB of memory, the optional installation of PC1600 Registered ECC SDRAM Memory kits, and a second, optional memory board.

NOTE: Memory must be added in banks of four DIMMS. This chart does not represent all possible memory configurations.

Standard Memory Summary

Standard Memory Board (Slots)

1

2

3

4

5

6

7

8

Standard

2048 MB

512 MB

512 MB

512 MB

512 MB

Empty

Empty

Empty

Empty

Optional 2nd Memory Board (Slots)

1

2

3

4

5

6

7

8

Empty

Empty

Empty

Empty

Empty

Empty

Empty

Empty

|

Optional Memory Summary

Standard Memory Board (Slots)

Optional (Standard Memory Plus Optional Memory Board and Optional Memory)

26,624 MB

1

2

3

4

5

6

7

8

512 MB

512 MB

512 MB

512 MB

2048 MB

2048 MB

2048 MB

2048 MB

Optional 2nd Memory Board (Slots)

1

2

3

4

5

6

7

8

2048 MB

2048 MB

2048 MB

2048 MB

2048MB

2048 MB

2048 MB

2048 MB

|

Maximum Memory Summary

Standard Memory Board (Slots)

Maximum (Standard Memory Replaced with Optional Memory with Optional Memory board)

32,768 MB

1

2

3

4

5

6

7

8

2048 MB

2048 MB

2048MB

2048 MB

2048 MB

2048 MB

2048 MB

2048 MB

Optional 2nd Memory Board (Slots)

1

2

3

4

5

6

7

8

2048 MB

2048 MB

2048 MB

2048 MB

2048 MB

2048 MB

2048 MB

2048 MB

|

The following memory options are available from HP:

1 GB PC1600 Registered ECC SDRAM Memory Kit (4 x 256 MB)

202170-B21

2 GB PC1600 Registered ECC SDRAM Memory Kit (4 x 512 MB)

202171-B21

4 GB PC1600 Registered ECC SDRAM Memory Kit (4 x 1024 MB)

202172-B21

8 GB PC1600 Registered ECC SDRAM Memory Kit (4 x 2048 MB)

202173-B21

Expand your memory capacity with the Hot Plug Memory Expansion Board. Provides 8 additional DIMM slots for powering memory-intensive applications.

Hot Plug Memory Expansion Board

203320-B21

HP ProLiant DL580 G2 1P Models

Standard Memory
1024 MB 200MHz Double Data Rate (DDR) SDRAM (PC1600 Registered SDRAM Memory with Advanced ECC functionality

Standard Memory Plus Optional Memory and Optional memory board
Up to 25,600 MB memory is available with the optional installation of PC1600 Registered ECC SDRAM Memory kits and a second, optional memory board.
Standard Memory Replaced with Optional Memory and optional memory board
Up to 32,768 MB of memory is available with the removal of the standard 1024 MB of memory, the optional installation PC1600 Registered ECC SDRAM Memory kits, and a second, optional memory board.

NOTE: Memory must be added in banks of four DIMMS. This chart does not represent all possible memory configurations.

Standard Memory Summary

Standard Memory Board (Slots)

1

2

3

4

5

6

7

8

Standard

1024 MB

256 MB

256 MB

256 MB

256 MB

Empty

Empty

Empty

Empty

Optional 2nd Memory Board (Slots)

1

2

3

4

5

6

7

8

Empty

Empty

Empty

Empty

Empty

Empty

Empty

Empty

|

Optional Memory Summary

Standard Memory Board (Slots)

Optional (Standard Memory Plus Optional Memory Board and Optional Memory)

25,600 MB

1

2

3

4

5

6

7

8

256 MB

256 MB

256 MB

256 MB

2048MB

2048MB

2048MB

2048MB

Optional 2nd Memory Board (Slots)

1

2

3

4

5

6

7

8

2048MB

2048MB

2048MB

2048MB

2048MB

2048MB

2048MB

2048MB

|

Maximum Memory Summary

Standard Memory Board (Slots)

Maximum (Standard Memory Replaced with Optional Memory with Optional Memory board)

32,768 MB

1

2

3

4

5

6

7

8

2048 MB

2048 MB

2048 MB

2048 MB

2048 MB

2048 MB

2048 MB

2048 MB

Optional 2nd Memory Board (Slots)

1

2

3

4

5

6

7

8

2048 MB

2048 MB

2048 MB

2048 MB

2048 MB

2048 MB

2048 MB

2048 MB

|

The following memory options are available from HP:

1 GB PC1600 Registered ECC SDRAM Memory Kit (4 x 256 MB)

202170-B21

2 GB PC1600 Registered ECC SDRAM Memory Kit (4 x 512 MB)

202171-B21

4 GB PC1600 Registered ECC SDRAM Memory Kit (4 x 1024 MB)

202172-B21

8 GB PC1600 Registered ECC SDRAM Memory Kit (4 x 2048 MB)

202173-B21

Expand your memory capacity with the Hot Plug Memory Expansion Board. Provides 8 additional DIMM slots for powering memory-intensive applications.

Hot Plug Memory Expansion Board

203320-B21

Overview      Standard Features      Solutions      Models      Options      Memory      Storage      Power Specifications      Technical Specifications

Storage

A

Diskette Drive eject button

B

Ejectable: 24x IDE CD-ROM (Slimline)

C

Ejectable: 1.44-MB Diskette Drive (Slimline)

D

CD-ROM Drive eject button

E

800-Watt (low line or high line) Redundant Hot Plug Power Supply

F

800-Watt (low line or high line) Primary Hot Plug Power Supply

0-3

Wide Ultra3 Drive Cage (Duplex or Simplex configurable). Duplex is standard shipping configuration

Drive Support

Quantity
Supported

Position
Supported

Controller

Ejectable Slimline Drives

| 1.44-MB slimline Diskette Drive | Up to 1 | C | Integrated
| IDE slimline CD-ROM Drive | Up to 1 | B | Integrated IDE
| Slimline DVD-ROM Drive (8X/24X) Option Kit | Up to 1 | B or C | Integrated IDE

Hard Drives

| Ultra320 Hot Pluggable Drives

Quantity
Supported

Position
Supported

Controller

1-inch
300-GB 10,000 rpm
146.8-GB 10,000 rpm
72.8-GB 10,000 rpm
146.8-GB 15,000 rpm
72.8-GB 15,000 rpm
36.4-GB 15,000 rpm

Up to 4

0-3

Smart Array 5i Plus Controller (integrated on system board)
Smart Array 6402/128 Controller
Smart Array 641 Controller
Smart Array 642 Controller
64-Bit/133-MHz Dual Channel Ultra320 SCSI Adapter

| NOTE: All U320 Universal Hard Drives are backward compatible to U2 or U3 speeds. U320 drives require an optional U320 Smart Array Controller or U320 SCSI HBA to support U320 transfer rates.

External Storage

Quantity
Supported

Position
Supported

Host Controller or Adapter

Modular Smart Array 30 Family

Up to 20

External

Smart Array 6402/128 Controller
Smart Array 6404/256 Controller
Smart Array 642 Controller
64-Bit/133-MHz Dual Channel Ultra320 SCSI Adapter
64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate OS

Modular Smart Array 500 System

1

External

Smart Array 532 Controller (used as Host Bus Adapter)
Please see the Modular Smart Array 500 QuickSpecs for the latest list of supported HBAs: http://www.hp.com/go/msa500

| Modular Smart Array 1000 | Please see the Modular Smart Array 1000 QuickSpecs below to determine configuration requirements | External | Please see the Modular Smart Array 1000 QuickSpecs (URL below) for the latest list of supported HBAs
| Modular Smart Array 1500 cs | Please see the Modular Smart Array 1500 cs QuickSpecs below to determine configuration requirements | External | Please see the Modular Smart Array 1500 cs QuickSpecs (URL below) for the latest list of supported HBAs

Modular Smart Array 1000: http://h18000.www1.hp.com/products/quickspecs/11033_na/11033_na.html
Modular Smart Array 1500 cs: http://www.hp.com/go/MSA1500cs

Maximum Storage Capacity – (External Enclosure Attached)

Internal

1.20 TB (4 x 300-GB Ultra320 SCSI 1" Drives)

| External | 84.00 TB (20 x (14 x 300-GB Ultra320 SCSI 1" Drives))
| Total | 85.20 TB

Tape Drives, Tape Autoloaders, & Tape Libraries

NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the following:
http://h18000.www1.hp.com/products/quickspecs/north_america/10233.html

NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Autoloaders and Tape Libraries listed below, please see the following:
http://h18000.www1.hp.com/products/quickspecs/north_america/10809.html

NOTE: For complete listing of tape drive offerings see http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html

For details on connecting tape drives to this server, see the following:

Quantity
Supported

Position
Supported

Controller

HP StorageWorks Tape Drives, Hot Plug
DAT 40 Hot Plug
DAT 72 Hot Plug

1

0-3

Smart Array 5i Plus Controller (integrated on system board)
64-Bit/133MHz Dual Channel Ultra320 SCSI Adapter
64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2
64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate OS

| | |

HP StorageWorks Tape Drives, USB External
DAT 24 USB
DAT 40 USB
DAT 72 USB

Up to 2

External

USB Port

| | |

HP StorageWorks Tape Drives, External
Ultrium 960
SDLT 600

1 per SCSI Channel

External

64-Bit/133MHz Dual Channel Ultra320 SCSI Adapter
64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2
64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate OS

| | |

HP StorageWorks Autoloaders, External
DAT 72x6 Tape Autoloader
1/8 Tape Autoloader
SSL1016 Tape Autoloader

1 per SCSI channel

External

64-Bit/133MHz Dual Channel Ultra320 SCSI Adapter
64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2
64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate OS

| | |

HP StorageWorks Rack-mount Tape Drive Enclosures
1U Rack-Mount Kit
3U Rack-Mount Kit
5U Rack-Mount Kit

1 per SCSI channel

External

64-Bit/133MHz Dual Channel Ultra320 SCSI Adapter
64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2
64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate OS

| | |

HP StorageWorks Tape Libraries, External
MSL2024 (Ultrium 960-based)
MSL2024 (Ultrium 448-based)
MSL6000 (Ultrium 960-based)
MSL6000 (SDLT 600-based)
MSL6000 (Ultrium 460-based)
MSL5026S2 (SDLT 320-based)
MSL5052S2 (SDLT 320-based)

Please reference the MSL Tape Library QuickSpecs to determine configuration requirements

External

Please consult the EBS connectivity matrix at http://www.hp.com/go/ebs for detailed connectivity information.

Overview      Standard Features      Solutions      Models      Options      Memory      Storage      Power Specifications      Technical Specifications

Power Specifications

Part Number

278535-001

Spare Kit | 192201-B21
Operational Input Voltage Range (V rms) | 90 to 264
Frequency Range (Nominal) (Hz) | 47 to 63 (50/60)

Nominal Input Voltage (Vrms)

100

115

208

220

230

240

Max Rated Output Wattage Rating

800

800

800

800

800

800

Nominal Input Current (A rms)

11.7

9.9

5.2

4.9

4.7

4.5

Max Rated Input Wattage Rating (Watts)

1143

1111

1067

1067

1067

1053

Max. Rated VA (Volt-Amp)

1166

1134

1088

1088

1088

1074

Efficiency (%)

70

72

75

75

75

76

Power Factor

0.98

0.98

0.98

0.98

0.98

0.98

Leakage Current (mA)

.43

.50

.90

.96

1.00

1.04

Maximum Inrush Current (A peak)

25

25

25

25

25

25

Maximum Inrush Current duration

20

20

20

20

20

20

System Specifications

HP ProLiant DL580 G2 Fully Configured

| Up to 4 Processors, 16 Memory Slots, 4 Hard Drives, 6 PCI Slots, and 2 Hot Plug Power Supplies

Nominal Input Voltage (Vrms)

100

115

208

220

230

240

Fully Loaded System Input Wattage (W)

954

928

890

890

890

879

Fully Loaded System Input Current (A rms)

10

8.5

4.4

4.1

4.0

3.7

Fully Loaded System Thermal (BTU- Hr)

3253

3163

3063

3063

3063

2996

Fully Loaded System VA (Volt-Amp)

1004

976

909

909

909

897

System Leakage with all power supplies loaded (mA)

.87

1.00

1.81

1.91

2.00

2.09

System Inrush Current with all power supplies loaded (A)

50

50

50

50

50

50

Power cord requirements

Nema 5-15P to IEC320-C19

Option no./Spare no: 235603-001/237457-001

PDU Jumper Cord IEC320-C19 to
IEC320-C20

Option no./Spare no: 295633-B21/295508-001

PDU Jumper Cord IEC320-C14 to
IEC320-C19

Option no./Spare no: 291034-001/292241-001

NOTES:
ActiveAnswers Power Calculation
Power calculator is LIVE on ActiveAnswers website. This is an external link.
Follow this link: http://h30099.www3.hp.com/configurator/powercalcs.asp.

To drill down to calculators:
-  Click on: "ProLiant Servers"
-  Click on the Server of interest. Example: DL580 G2
-  Click on: "Power Calculator" link (You may need to scroll down to see it.)

Power Cord Part Number | 295529-001

Overview      Standard Features      Solutions      Models      Options      Memory      Storage      Power Specifications      Technical Specifications

Technical Specifications

System Unit Rack

Chassis Footprint (HxWxD)

6.94 x 19 x 26.5 in (17.6 x 48.3 x 67.3 cm)

Weight
No hard drives installed,
one power supply

66 lb (29.9 kg)

Input Requirements

Rated Input Voltage

100 to 120 VAC/200 to 240 VAC

Rated Input Frequency | 50 to 60 Hz
Input Power | 1135W @ 110 VAC/1125W @ 220 VAC
Rated Input Current | 12A (100 VAC), 9.8A (120 VAC), 4.9A (220 VAC)
Max BTU Rating | 4000 BTU |
Power Supply Output Power (per power supply) | Rated Steady-State Power | 800W/800W (lowline/highline)
Maximum Peak Power | 800W/800W (lowline/highline)
Temperature Range | Operating | 50° to 95° F (10° to 35° C)
Non-operating | -20° to 140° F (-29° to 60° C)
Shipping | -22° to 122° F (-30° to 50° C)

Relative Humidity
(non-condensing)

Operating

10% to 70%

Non-operating | 5% to 95%

Maximum Wet Bulb Temperature

101.7° F (38.7° C)

Acoustic Noise

NOTE: Listed are the declared A-weighted sound power levels LWAd and the declared average bystander position sound pressure levels LpAm when operating in a 23° C ambient environment. Noise emissions were measured in accordance with ECMA 74 and declared in accordance with ECMA 109.

Idle (Fixed Disk Drives Spinning) |
| L WAd (BELS) | 7.0
| L pAm (dBA) | 54
NOTE: These values apply to 2U rack configuration. Configuration tested included 2 processors, two 10, 000 rpm hard drive, 1 power supplies, 1 power supply fan and 4 CPU fans.

24X Max (or higher) IDE CD-ROM Drive Slim Line

Disk

Applicable Disk

CD-DA, CD-ROM (Mode 1 and 2)

| CD-XA, CD-I (Mode 2, Form 1 and 2)
| | Photo CD (Single and Multi-session)
| | Mixed Mode (Audio and Data combined)
| Capacity | 540 MB (Mode 1, 12 cm)
| | 650 MB (Mode 2, 12 cm)
| Diameter | 4.7 x 3.15 in (12 x 8 cm)
| Rotational Speed | 4200 rpm maximum
| Center Hole | 0.6 in/15 mm diameter
| Thickness | 1.2 mm
| Track Pitch | 1.6 µm
Block Size | Mode 1 | 2,048
| Mode 2 | 2,340, 2,336, 1,024 bytes
| CD-DA | 2,352 bytes
| CD-XA | 2,328 bytes
Interface | IDE (ATAPI) |
Access Times (typical) | Random | 100 ms
Full-Stroke | 2000 ms
Audio Output Level | Line-Out | 0.7 VRMS at 47 kOhms
Headphone | 0.6 VRMS at 32 kOhms (maximum volume)
Data Transfer Rate | Sustained | 150 KB/s (sustained 1X)
Burst | 2100 to 3600 KB/s
Cache Buffer | 128 KB |
Start-up Time (typical) | < 7seconds |
Stop Time | < 4seconds |
Laser Parameters | Type | Semiconductor Laser GaA1As
Wave Length | 780 ± 25 nm
Divergence Angle | 53.5° ± 1.5°
Output Power | 0.14 mW
Operating Conditions | Temperature | 41° to 113° F (5° to 45° C)
| Humidity | 10% to 80%

Dimensions

(HxWxD, maximum)

1.69 x 5.75 x 8.19 in (4.29 x 15 x 20.8 cm)

| Weight | 2.66 lb (1.2 kg)

Slimline CD-RW/DVD-ROM 24X Combo Drive (Multibay)

Shipping Dimensions

13.88 x 11.38 x 9.25 in (35.26 x 28.91 x 23.50 cm)

Shipping Weight

5 lb (2.27 kg)

Disk

Applicable Disk

DVD-ROM

DVD-R (Read Only)

2.6 GB/side DVD-RAM (Read Only)

5.2 GB/side DVD-RAM (Read Only)

CD-ROM Mode-1 data disc

| | CD-ROM Mode-2 data disc
| | CD Audio disc
| | CD-Extra
| | CD-RW
| | CD-R
| | CD Text
| | PhotoCD
| | CD-I (mode 2)
| | CD-I Ready
| | CD-Bridge

Capacity

DVD-ROM

DVD-SL

4.7 GB/side

| | | DVD-DL | 8.5 GB/side
| | | Double Sided | 9.40 GB/side
| | DVD-R | | 3.95 GB/side
| | DVD-RAM | | 2.6 GB/side and 5.2 GB/
| | CD-ROM | Mode-1 | 650 MB (550 MB)
| | | Mode-2 | 742 MB (640 MB)
| Block Size | DVD | | 2,048 bytes
| | CD | | 2,352 (Mode-0)

2352, 2340, 2336, 2048 bytes
(Mode-1)

2352, 2340, 2336, 2048 bytes
(Mode-2)

Diameter

120 mm, 80 mm (with adapter at vertical mounting mode)

Loading Mechanism

Tray type

Interface

EIDE (ATAPI)

Access Times (typical)

Random

DVD-ROM < 120 ms, CD-ROM < 110 ms

Full-Stroke

DVD-ROM < 240 ms, CD-ROM < 160 ms

Audio Output Level (typical)

Line-out

CD 0.7 Vrms at 47 Kohms Load

Data Transfer Rate (sustained)

DVD-ROM

Single Layer

10.8 MB/sec. Max.

DVD-RAM | 2.77 MB/sec. Max

CD-ROM

7.2 MB/sec. Max.

Cache Buffer

2 MB

Spin-up Time (typical)

less than 10 seconds

MTBF

120,000 Power On Hours (POH)

Ambient Temperature

Operating

-22° to 140° F (-30° to 60° C)

Relative Humidity

Operating

10% to 80%

Storage/Transportation

5% to 95%

Dimensions

(HxWxD, maximum)

0.5 x 5.04 x 5.1 in (12.7x128x129.4 mm)

Option Kit Contents | DVD-ROM drive with installation guide, warranty card, registration card

Integrated Lights-Out Standard (integrated on system board) | Architecture | 32-bit PCI-based health and remote management ASIC (Application Specific Integrated Circuit)
Processor | 32-bit RISC processor core running at 66 MHz
Upgradability | Option firmware upgradable via flash ROM.
Video Support | Utilizes the host server's embedded video chip. Supports VGA/SVGA, 640 x 480 (256 to 16.7M colors), 800 x 600 (256 to 16.7M colors), 1024 x 768 (256 to 65K colors), 1280 x 1024 (256 colors)
Interfaces | One Ethernet network connection (10/100 Mb/s)
Memory | 2-MB Flash ROM
8-MB SDRAM
Operating System Support | Microsoft Windows NT 4.0 Server
Windows NT 4.0 Enterprise Edition
Windows 2000 Server
Windows 2000 Advanced Server
Red Hat 7.x
SuSE 7.0
Novell NetWare 5.x, 6.x
Client Browser Support | Microsoft Internet Explorer 5.5 or later.
iLO Standard Features | Virtual Text Remote Console
Virtual Power Button Control
Dedicated LAN Connectivity
Automatic IP Configuration via DHCP/DNS/WINS
Industry Standard 128-bit Secure Sockets Layer (SSL) Security
IML and iLO Event Logging
Support for up to 12 user accounts with customizable access privileges
iLO Advanced Features (optional) | Virtual Graphical Remote Console
Virtual Floppy Drive

Integrated Smart Array 5i Plus Controller

Data Compatible with all Smart Array Controllers

Yes

Instant Upgrades to other Smart Array Controllers | Yes
Consistent Software Manageability Tools | Yes
PCI-X Bus | 64-bit, 100 MHz (integrated on system board)
PCI-X Peak Data Transfer Rate | 800 MB/s
SCSI Protocols Supported | Ultra3, Ultra2
SCSI Peak Data Transfer Rate | 160 MB/s per channel
NOTE: For ProLiant servers having TWO internal drive bays on separate SCSI ports: SCSI Peak Data Transfer Rate is 320 MB/s total; 160 MB/s per channel and Channels is 2.
Channels | 2 (only one connected)
NOTE: For ProLiant servers having two internal drive bays on separate SCSI ports: SCSI Peak Data Transfer Rate is 320 MB/s total; 160 MB/s per channel and Channels is 2.
SCSI Ports (external/internal) | 0/1
NOTE: For ProLiant servers having two internal drive bays on separate SCSI ports: SCSI Peak Data Transfer Rate is 320 MB/s total; 160 MB/s per channel and Channels is 2.
Drives Supported (maximum) | 2
NOTE: Maximum is the total number of internal drives on each specific ProLiant server.
Cache | 64 MB Read and/or Write Cache
Battery-Backed Write Cache | Yes, with installation of Battery-Backed Write Cache Enabler, up to 64MB
RAID Support | 0, 1, 1+0, 5
Logical Drives (maximum) | Maximum = total number of drives
Online Configuration | Yes
Online Capacity Expansion | Yes
Logical Drive Capacity Extension | Yes
Online Stripe Size Migration | Yes
Online RAID Level Migration | Yes
Online Spare Support | Yes
Automatic Data Recovery | Yes
Drive Roaming | Yes
Redundant Controllers | No

HP NC7170 Dual Port PCI-X 1000T Gigabit Server Adapter

Network Interface

Two 10/100/1000-T ports

Compatibility | IEEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
| IEEE 802.3ad, IEEE 802.3p, and IEEE 802.3Q
Data Transfer Method | 64-bit/133MHz PCI-X, compatible with 64/100, 64/66, 64/33 and 32/33
Network Transfer Rate | 10Base-T (Half-Duplex) | 10 Mb/s
10Base-T (Full-Duplex) | 20 Mb/s
100Base-TX (Half-Duplex) | 100 Mb/s
100Base-TX (Full-Duplex) | 200 Mb/s
1000Base-T (Half and Full-Duplex) | 2000 Mb/s
Connector | Two RJ-45
Cable Support | 10Base-T | 10Base-T
10/100/1000Base-T | 10/100/1000Base-T

NC7770 PCI-X Gigabit Server Adapter

Network Interface

10/100/1000-T

Compatibility | IEEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
Data Transfer Method | 64-bit/133MHz PCI-X
Network Transfer Rate | 10Base-T (Half-Duplex) | 10 Mb/s
10Base-T (Full-Duplex) | 20 Mb/s
100Base-TX (Half-Duplex) | 100 Mb/s
100Base-TX (Full-Duplex) | 200 Mb/s
1000Base-T (Half and Full-Duplex) | 2000 Mb/s
Connector | RJ-45
Cable Support | 10Base-T | Category 3,4 or 5 UTP up to 328 ft (100 m)
10/100/1000Base-T | Category 5 UTP (2 pair); up to 328 ft (100 m)

© Copyright 2005 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice.

Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel Corporation. Unix is a registered trademark of The Open Group.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

DA-11372 - U.S. - Version 74 - December 16, 2005