TNC connector

From Wikipedia, the free encyclopedia

Jump to: navigation, search

TNC connector on the left beside BNC.

The TNC (threaded Neill-Concelman) connector is a threaded version of the BNC connector. The connector has a 50 Ω impedance and operates best in the 0–11 GHz frequency spectrum. It has better performance than the BNC connector at microwave frequencies. Invented in the late 1950s and named after Paul Neill of Bell Labs and Carl Concelman of Amphenol, the TNC connector has been employed in a wide range of radio and wired applications.

Contents

1 Variations

1.1 Reverse-polarity TNC
1.2 75 Ohm TNC

2 Retail uses
3 See also
4 References

[edit] Variations

[edit] Reverse-polarity TNC

Reverse-polarity TNC (RP-TNC) is a variation of the TNC specification which reverses the polarity of the interface. This is usually achieved by incorporating the female contacts normally found in jacks into the plug, and the male contacts normally found in plugs into the jack. RP-TNC connectors are widely used by Wi-Fi equipment manufacturers to comply with specific local regulations, i.e. those from the FCC, which are designed to prevent consumers from connecting aerials which exhibit gain and therefore breach compliance. This is the case for the popular Cisco line of Wi-Fi products. RP-TNC can also be abbreviated as RTNC.

[edit] 75 Ohm TNC

Most TNC connectors are 50-ohm type even when used with coaxial cable of other impedances,[citation needed] but a 75-ohm series is also available, providing a good SWR to about 1 GHz.[1] These can be recognized by a reduced amount of dielectric in the mating ends. They are intermatable with standard types.

[edit] Retail uses

Linksys, a manufacturer of consumer networking equipment, uses RP-TNC connectors for several of its Wi-Fi-certified routers, including the popular WRT54G. Linksys also sells add-on antennas for its routers which use the connector.

Telex Communications, a manufacturer of hearing aids and audio equipment, uses TNC connectors on its Radiocom BTR-800 partyline intercom base station for the transmit and receive antennas.

Camplex, a Camera multiplexing unit, uses TNC connectors to send power/tallies/intercom to a camera. The camera sends back audio, video, and intercom. Camplex Website

Icom, a mobile telecommunicanions equipment manufacturer, uses TNC antenna output terminals in some models intented for the professional VHF PMR market.

[edit] See also

SMA connector, also has RP-SMA version used for Wi-Fi
SMB connector
SMC connector

[edit] References

TNC Connector Series. URL accessed on 19 July 2005

v • d • e

RF connectors

N · BNC · TNC · F · SMA · SMB · SMC · TV Aerial Plug · MMCX · MCX · FME · C · UHF · GR · Motorola · Musa · Mini-UHF · QMA/QN · APC-7 · EIA · Hirose U.FL

| This electronics-related article is a stub. You can help Wikipedia by expanding it.

Retrieved from "http://en.wikipedia.org/wiki/TNC_connector"

Categories: Coaxial connectors | Electronics stubs

Hidden categories: All articles with unsourced statements | Articles with unsourced statements since July 2007

Views

Article
Discussion
Edit this page
History

Personal tools

Log in / create account

Navigation

Main page
Contents
Featured content
Current events
Random article

Search

Interaction

About Wikipedia
Community portal
Recent changes
Contact Wikipedia
Donate to Wikipedia
Help

Toolbox

What links here
Related changes
Upload file
Special pages
Printable version
Permanent link
Cite this page

Languages

Svenska

This page was last modified on 15 January 2009, at 22:22.
All text is available under the terms of the GNU Free Documentation License. (See Copyrights for details.)
Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc., a U.S. registered 501(c)(3) tax-deductible nonprofit charity.

Privacy policy
About Wikipedia
Disclaimers