Snap-in Type TACT Switch(TM) > SKHC Series > SKHCBEA010

12mm Square Type (Snap-in) SKHC Series

｜Photo Stem color : Black ｜Dimensions ｜Mounting Hole Dimensions ｜Circuit Diagram ｜
｜Packing Specifications ｜Soldering Conditions ｜Products Line of Knob ｜

Part number | SKHCBEA010

Type | Snap-in
Operating force | 1.27N
Operating direction | Top push
Travel | 0.3mm

Operating life
(5mA 5V DC)

1,000,000 cycles

Initial contact resistance | 100mΩ max.
Stem color | Black
Stem | Joint stem

Series type | Sharp feeling type
Operating temperature range | -40℃ to +85℃
Rating (max.) | 50mA 12V DC
Rating (min.) | 10µA 1V DC
Electrical performance | Insulation resistance | 100MΩmin. 100V DC for 1min.
Voltage proof | 250V AC for 1 min.
Durability | Vibration | 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively
Environmental performance | Cold | -40±2℃ for 96h
Dry heat | 90±2℃ for 96h
Damp heat | 60±2℃, 90 to 95%RH for 96h

Minimum order unit (pcs.) | Japan | 1,000
Export | 1,000

3D CAD (STEP) |
Certificate of Compliance to RoHS regulations |

Photo Stem color : Black

Dimensions

Mounting Hole Dimensions

Circuit Diagram

Packing Specifications

Bulk

Number of packages (pcs.) | 1 case / Japan | 5,000
1 case / export packing | 15,000
Export package measurements (mm) | 309×476×347

Soldering Conditions

Conditions for Auto-dip

Items | Condition
Flux built-up | Mounting surface should not be exposed to flux

Preheating temperature

Ambient temperature of the soldered surface of PC board.
100℃ max.

Preheating time | 60s max.
Soldering temperature | 260℃ max.
Duration of immersion | 5s max.
Number of soldering | 2 times max.

Manual Soldering

Items | Condition
Soldering temperature | 350℃ max.
Duration of soldering | 3s max.
Capacity of soldering iron | 60W max.

1. Consult with us for availability of TACT switch™ washing.

2. Prevent flux penetration from the top side of the TACT switch™.

3. Switch terminals and a PC board should not be coated with flux prior to soldering.

4. The second soldering should be done after the switch returns to normal temperature.

5. Use the flux with a specific gravity of at least 0.81.
(EC-19s-8 by TAMURA Corporation, or their equivalents.)

Products Line of Knob

Dimensions (Unit: mm) |
Label dimensions (Unit: mm) |

1. The knob will be delivered together with the switch but packed separately.
2. The label is not included.

3. For SK2AA00010 to SK2AA00090 type, check its mounting direction.

|

Notes are common to this series/models.

This site catalog shows only outline specifications. When using the products, please obtain formal specifications for supply.
Please use 1.6mm thick PC boards.
Please place purchase orders per minimum order unit (integer).
Please contact us for automotive use.