A251A CNCUSB

4 Axis USB CNC Controller Alternative MACH3 USBCNC 2.1 


http://www.ebay.it/itm/321133078386?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649&clk_rvr_id=1122121413661&rmvSB=true



Specifications:

    1.Works on MacOS X (Snow Leopard 10.6.3) with virtual machine emulating Windows XP SP3
    2.USB (V2.x) from PC/Laptop running Windows XP, Vista or Windows 7 (32 bit or 64bit)
    3.Motor driver connector pin-out is compatible with 10 pin open source interface (Linistepper, PICStep)
    4.controller works with most step/dir stepper and servo motor drivers available on the market
    5.buffered IO for maximum performance
    6.advanced interpolation algorithms
    7.start, stop, pause and resume execution of program on your machine
    8.standard RS274/NGC G-code (EMC2 compatible)
    9.advanced G-codes - G40, G41, G42 (Cutter Radius Compensation) supported
    10.advanced G-codes - G43, G49 (Tool Length Offsets) supported
    11.advanced G-codes - G54, G59.3 (Coordinate System Origins) supported
    12.tested with SolidCAM, MasterCAM, ArtCAM, Vectric, CamBam, MeshCAM ... generated G-code
    14.Profili 4-axes and 3-axes G-code supported
    15. import toolpath from DXF files
    16.import toolpath from PLT/HPGL files
    17.import toolpath from image files
    18.import toolpath from NC-Drill (Excellon) files
    19.import toolpath from Gerber (RS-274X) files
    20.toolpath simulation
    21.automatic homing procedure
    22.advanced toolchange procedures
    23.automatic tool length measuring
    24.export toolpath to G-code
    25.export toolpath to DXF
    26.SDK (software developers kit) is available
    27.25 kHz maximum step frequency
    28.3 digital outputs (flood, mist, spindle)
    29.12 us minimum pulse width
    30.manual jog inputs for all axes
    31.limit inputs for all axes
    32.control external devices with I2C protocol

Pls pay attention to our title: "Alternative MACH3", it means it can replace MACH3, has the function of it, then it will not work with MACH3. 
 

 

Package List:

 

1 * 4 Axis USBCNC 2.1 Substitute MACH3 Interface Board

 

1 * USB 2.1 Cable

 

If you have not registered, it can only use the software in August 2012.(DOWNLOAD)