Danfoss EV250B Solenoid Valve

The Danfoss VLT 2800
Need specialist advice on the
Danfoss VLT 2800, FC 300
or VLT Micro drives range?

Call or email Ray Hargreaves -
CSE's Danfoss Consultant
on 023 8063 3055

Click for Danfoss VLT 2800 PDF

Danfoss VLT 2800 Inverter Drives

The VLT® 2800 series are among the smallest multi-purpose drives in the market, designed for space saving side-by-side mounting. Choose to have it with Motor Coils, RFI fi lter, LC+1B fi lters e.g.
The VLT® 2800 is designed as an advanced and versatile drive,
yet easy to operate. Quick menu includes all basic parameters
needed for commissioning the drive, off ering fast installation
and service.

Product Range

0.55 – 18.5 kW
(3 phase 380 - 480 V ± 10 %; 50/60 Hz)
0.37 - 1.5 kW
(Combined 1 and 3 phase 200 - 240 V ± 10 %; 50/60 Hz)
2.2 - 3.7 kW
(3 phase 200 - 240 V ± 10 %; 50/60 Hz)

Variable output frequency between 0 and 1000 Hz

Product safety

  • 100 % short-circuit proof
  • 100 % earth fault protection
  • Mains transient protection
  • Switching on input
  • Switching on output
  • Galvanic isolation
  • Designed according to EN 50178

Speed compensation precise stop

  • Better process control
  • Same stopping distance independent of initial motor speed

Precise stop

  • Interrupt controlled stop
  • Higher process repeatability
  • Well defined stopping

Counter stop

  • Accurate positioning
  • High frequency input (65 kHz)
  • 24 V incremental encoder input
  • AB encoder input as option

Automatic motor tuning

  • Perfect match between motor and drive
  • Measures the stator resistance (RS)
  • Better shaft performance
  • Measurements done without applying torque
  • Checks for missing motor phases

Flexible mounting

  • Horizontal mounting
  • Vertical mounting
  • True side-by-side mounting
  • No derating
  • Also applies to modules
  • Temperature controlled fan
 

Cold plate technology

  • Reduced heating in cabinet
  • Denser installation
  • Higher enclosure class cabinets
  • Protection against:
    • Dust
    • Dirt
    • Humidity
  • Heat dissipates through the back of the drive

Communication

  • DeviceNet
  • ModBus RTU
  • Profibus DP, optional

  • Fieldbus systems
  • Profibus DP 3 or 12 Mbit/s
  • Up to 127 nodes per installation
  • Homepage: www.profibus.com
  • DeviceNet Up to 500 kbit/s
  • Up to 64 nodes per installation

EMC filter and DC coils

  • Compliance with EMC Standards.
  • Built-in EN 55011 1A filter, 25 m screened cable.
  • No EMC disturbance.
  • EN 55011 1B filter available as module.
  • IT mains compatible version with RFI filter (up to 4 kW).
  • VLT 2880-2882 with RFI-switch.

Braking facilities

  • DC-braking - approx. 20% braking torque
  • AC-braking - approx. 20% braking torque
  • Dynamic braking
    • - Brake chopper built-in
    • - 160% braking torque
  • LCP2 Alpha numeric display, with copy function
  • MCT10 software

Danfoss VLT 2800 Series Options

VLT Type Typical Shaft Output (kW) Cont. Output current (Amps) @ 200 / 240V Input 50/60Hz IP20 Output 50/60Hz IP20
VLT 2803 0.37 2.2 240V, 1PH 240V, 3Ph
VLT 2805 0.55 3.2 240V, 1Ph 240V, 3Ph
VLT 2807 0.75 4.2 240V, 1Ph 240V, 3Ph
VLT 2811 1.10 6.0 240V, 1Ph 240V, 3Ph
VLT 2815 1.50 6.8 240V, 1Ph 240V, 3Ph
VLT Type Typical Shaft Output (kW) Cont. Output current (Amps) @ 380 / 415V Input 50/60Hz IP20 Output 50/60Hz IP20
VLT 2805 0.55 1.7 400V, 3Ph 400V, 3Ph
VLT 2807 0.75 2.1 400V, 3Ph 400V, 3Ph
VLT 2811 1.10 3.0 400V, 3Ph 400V, 3Ph
VLT 2815 1.50 3.7 400V, 3Ph 400V, 3Ph
VLT 2822 2.20 5.2 400V, 3Ph 400V, 3Ph
VLT 2830 3.00 7.0 400V, 3Ph 400V, 3Ph
VLT 2840 4.00 9.1 400V, 3Ph 400V, 3Ph
VLT 2855 5.50 12.0 400V, 3Ph 400V, 3Ph
VLT 2875 7.50 16.0 400V, 3Ph 400V, 3Ph
VLT 2880 11.00 24.0 400V, 3Ph 400V, 3Ph
VLT 2881 15.00 32.0 400V, 3Ph 400V, 3Ph
VLT 2882 18.50 37.5 400V, 3Ph 400V, 3Ph


VLT 2800 General Options

Part Number Description Used on VLT
175N0131 LCP2 Control Unit (IP.65) All
175Z0850 Remote mounting kit for LCP (includes 3m cable) All
175Z0929 Cable for LCP - 3 m (Also included in remote kit) All
175N0128 L O P (Local Operating Pad) - includes cable All
195N3113 Cable for 'DeviceNet' Connection All
195N1900 NEMA 1 Terminal Cover - Used on:

VLT 2803 - VLT 2815 (200 - 240V)
VLT 2805 - VLT 2815 (380 - 480V)

Call
195N1901 NEMA 1 Terminal Cover - Used on:

VLT 2822 - (200 - 240V)
VLT 2855 - VLT 2875 (380 - 480V)

  

Call

195N1902 NEMA 1 Terminal Cover - Used on:

VLT 2840 - (200 - 240V)
VLT 2855 - VLT 2875 (380 - 480V)

Call
195N3110 Motor coil module All
195N3103 1B RFI Filter Module All
195N3100 1B RFI / LC Filter Module - 4 amps
VLT 2803 - VLT 2805 (200 - 240V)
VLT 2805 - VLT 2815 (380 - 480V)		 Call
195N3101 1B RFI / LC Filter Module - 9.1 amps
VLT 2807 - VLT 2815 (200 - 240V)
VLT 2822 - VTLT 2840 (380 - 480V)		 Call